I got some of my parts back from the powder coater this week..... Sat I installed my Monte Carlo Bar and worked with the breather tanks..... I am going to have make a small modification to the tanks to get everything how I want it.....
Today after deciding what to do with the breather tanks I worked on labeling the existing wire..... I am using some of the stock wiring harnesses for the wipers, heater and courtesy lights..... I also have the power window and stereo harnesses in there from the first time I wired under the dash..... I had to identify all the fused power wires for all those harnesses.....
Well I am back online again now after being down for a couple days..... I had a modem take a crap..... What the hell it was a dinosaur anyways, it as only 8 or 9 years old..... Over the weekend I was able to rearrange the wiring in the trunk for the water/meth kit..... I could not mount the bottle and pump because I did not have the brackets back from the powder coater yet, however I did get them back today...... I also worked on the underdash wiring a little more..... Here's what the trunk is looking like, not much new to see under the dash.....
What I dont see a trunk latch solenoid or is that what the 2 unused wires are for. Just like everything else on the car nice and sanitary
Thanks, those 2 wires are for the water/meth pump..... I didn't have the connector I wanted to use, but I do now and I also have the mounting brackets back from powder coat so the rest will be installed this weekend.....
I've been following your build for a while and I thought I would just put these two up for comparison in how far your build has come in just the engine compartment alone!
Had to work Saturday, but today I was able to get the trunk all put together..... Atleast on area of the car is ready to go.....
Awesome work, as usual! I assume that is a spare tire in the trunk. I am a believer in carrying some kind of spare; I see a lot of cars at shows/ cruise-inns minus a spare. Some of them came from afar -- Kudo's on the spare/emergency tire..
Beautiful work. Hope you can post a video of you car running when you are finished. Keep up the awesome work
Thanks..... I do drive my car and always carry a spare if at all possible..... When I use to drive a big tires pro street style car, I hated the fact that there was no place to carry a spare in that ride..... Thanks..... I am not much of a video guy, but I may try and get something up since I have had so many ask.....
This morning I had to change the oil and rotate the tires on my truck..... After that was done I got to work on the under dash wiring..... I didn't take any pic's today because there isn't much to see, maybe I'll take a couple tomorrow.....
Got some more done on the under dash wiring today..... Still a lot to go though, I have not even touched the Holley HP wiring yet..... Here's a couple pic's, even though you can't see too much.....
Still wiring stuff..... Regular under dash and gauge wiring all routed, getting ready to start routing Holley EFI wiring..... Not much too see, but here's a couple pic's.....
Looks like you're really getting close Frank .. I appreciate how ' neat ' you keep your worked-on areas. We just started my Daughters Maverick yesterday ( runs fine) and the 'inside' of her car is quite messy and we're completing the ' Under the Dash ' wiring for the AC and the gauges . I'm betting you'll be firing up your engine well before Christmas. Nice Work by the way . Cometized (ChipP