Radiator - cross or down flow?

Discussion in 'Technical' started by facelessnumber, Jan 31, 2010.

  1. facelessnumber

    facelessnumber Drew Pittman

    Joined:
    Oct 4, 2007
    Messages:
    3,710
    Likes Received:
    30
    Trophy Points:
    157
    Location:
    Memphis, TN
    Vehicle:
    '71 Grabber
    Which performs better?

    I would think cross flow would be better, and the fact that every modern car I've looked at uses them supports that idea, but our stock radiators are vertical, and all of the Maverick-specific aluminum radiators I've seen are built like that.

    I've got an 18"x22" aluminum cross flow, about 3" thick at the tanks, 2" at the core, two row. It does a good job. But unfortunately it has developed a hole that I don't think I can fix, so it's time for a new one. I might just order another one like I've got, but wanted to hear some other experiences first. I drive this car a lot, have air conditioning and I live in the south, so I need to make the right choice. Thanks!
     
    Last edited: Jan 31, 2010
  2. rthomas771

    rthomas771 Member

    Joined:
    Jan 22, 2008
    Messages:
    8,035
    Likes Received:
    930
    Trophy Points:
    498
    Garage:
    1
    Location:
    GA
    Vehicle:
    '74 Maverick 302 5-Speed.'60 Falcon V8. '63.5 Falcon HT
    Cross-flow will out perform a down-flow.
     
  3. mojo

    mojo "Everett"- Senior Citizen Supporting Member

    Joined:
    Jul 20, 2009
    Messages:
    5,270
    Likes Received:
    833
    Trophy Points:
    513
    Garage:
    1
    Location:
    Chicago
    Vehicle:
    73 Comet GT-302 4bl
    Cross Flow- Down Flow

    I agree abt living in the south and driving the car a lot and needing to make the right choice.
    2.) I also agree all the modern cars use the cross flow speaks for itself.
    I don't have a cross flow but all I've read on the radiator sites supports ur statement. Most things in life are compromises; down flow-direct fit probably easier installation. Cross flow install more involved but greater efficiency. Take ur pick. JMO.:bananaman
     
  4. facelessnumber

    facelessnumber Drew Pittman

    Joined:
    Oct 4, 2007
    Messages:
    3,710
    Likes Received:
    30
    Trophy Points:
    157
    Location:
    Memphis, TN
    Vehicle:
    '71 Grabber
    Thanks for your comments. I think in my case since I've already got a cross-flow mounted, installation just might be easiest if I went with what I have already:

    [​IMG]

    ...But I wanted to use this as an opportunity to get something better if there's another radiator out there that would be a better choice. Sounds like this one's still the way to go.
     
  5. baddad457

    baddad457 Member

    Joined:
    Feb 24, 2007
    Messages:
    5,861
    Likes Received:
    141
    Trophy Points:
    171
    Location:
    Opelousas La.
    The fact that cars now all use cross flow has nothing to do with which one's better. The reason all use cross flows now is due to the hood lines of cars today. A cross flow is simply the easier to manufacture when a radiator is wider than it is taller. Heavy trucks mostly still use downflow radiators. It's the overall size that matters, not whether the coolant flows down or across.
     
  6. RobbieG.

    RobbieG. Member

    Joined:
    Mar 13, 2007
    Messages:
    566
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    Phoenix Az.
    Vehicle:
    75 Maverick, 72 Maverick sprint, 67 Mustang bracket car, 02 F250 4X4
    i have cross-flows in my race car and my sons mav. they work way better.
    i use an AFCO and a griffin.
     
  7. Bryant

    Bryant forgot more than learned

    Joined:
    Aug 7, 2007
    Messages:
    6,538
    Likes Received:
    153
    Trophy Points:
    203
    Garage:
    1
    Location:
    San Diego
    Vehicle:
    71 Maverick
    i belive that the theory of the vertical radiator is that the heat will rise. so with that theory in mind the vertical radiator should be more efficent. tanks take up space so newer cars with lower hoods use crossflow because they have the space. in reality i doubt that there is any real advantage in efficency between the two. the only thing that you need to figure out is which way will give more exposed core to the air flow.
     
  8. rayzorsharp

    rayzorsharp I "AM" a Maverick!

    Joined:
    Mar 10, 2002
    Messages:
    11,256
    Likes Received:
    65
    Trophy Points:
    298
    Location:
    Grand Bay, Alabama
    Vehicle:
    Three 71 Maverick Grabbers, a 72 302 Sprint, a 73 LDO 2door parts car, a 76 silver v8 Stallion.
    Well, I have one of the direct bolt-in down flow aluminum radiators in my car. It works perfect, never no overheat problems even in bumper to bumper traffic, or idling for 30-45 minutes, has never gone over 185. If a crossflow is better than this, what is it going to do for me? :huh:
     
  9. mojo

    mojo "Everett"- Senior Citizen Supporting Member

    Joined:
    Jul 20, 2009
    Messages:
    5,270
    Likes Received:
    833
    Trophy Points:
    513
    Garage:
    1
    Location:
    Chicago
    Vehicle:
    73 Comet GT-302 4bl
    Cross Flow- Down Flow

    After reading all the philosphies here on Down Flow-Cross Flow I am in partial agreement w\ most when they mention lower hood line considerations. However, Be Cool Radiator's website states the Cross Flow is more efficient - So, I will have to go along w\ those who have been making them for years. I don't see where they have anything to gain by touting one over the other - they make them both.
    If I had that nice rad u have I wud put it in to, whatever flow - PERIOD. JMO:clap:
     
  10. bmcdaniel

    bmcdaniel Senile Member

    Joined:
    Jul 2, 2002
    Messages:
    6,795
    Likes Received:
    671
    Trophy Points:
    318
    Location:
    York. PA
    Vehicle:
    '70 Maverick Grabber
    I have an aluminum crossflow for sale, PM me if interested for pics.
     
  11. random hero

    random hero 1972 ford maverick I6

    Joined:
    Jan 8, 2007
    Messages:
    488
    Likes Received:
    0
    Trophy Points:
    0
    Location:
    hudson valley
    Vehicle:
    1972 maverick

    crossflow takes longer to circulate through the rad so it cools better
     
  12. Dave@RACEWARE

    Dave@RACEWARE Member

    Joined:
    Mar 3, 2006
    Messages:
    184
    Likes Received:
    2
    Trophy Points:
    47
    Location:
    New Britain, PA
    Vehicle:
    73 Maverick Graber 72 Comet GT
    Bryant you hit the nail on the head. I build custom cooling systems and cross flow radiators are not that much more efficient. Both are pressurized so it comes down to packaging more than anything. That being said there is more to a cooling system then just a radiator and all the components need to be matched to perform at peak efficiency.
     
  13. rthomas771

    rthomas771 Member

    Joined:
    Jan 22, 2008
    Messages:
    8,035
    Likes Received:
    930
    Trophy Points:
    498
    Garage:
    1
    Location:
    GA
    Vehicle:
    '74 Maverick 302 5-Speed.'60 Falcon V8. '63.5 Falcon HT
    It has a lot to do with the design too. My Falcon's old radiator has the inlet and outlet on the same side. Coolant will travel where there's less restriction, in this case it flows straight down. One side of the radiator was warm to the touch but the other side was too hot to touch.

    [​IMG]
     
  14. RASelkirk

    RASelkirk Retired!

    Joined:
    Jan 10, 2008
    Messages:
    1,393
    Likes Received:
    57
    Trophy Points:
    143
    Location:
    Port Neches, TX
    Vehicle:
    Sonic Blue '72 w/LS-1, 200R4, 9" w/3.50
    This is the second "hot rod" I can remember NOT having cooling problems with of any sort. And the first time I've ever tried a dual-pass radiator...
     
  15. facelessnumber

    facelessnumber Drew Pittman

    Joined:
    Oct 4, 2007
    Messages:
    3,710
    Likes Received:
    30
    Trophy Points:
    157
    Location:
    Memphis, TN
    Vehicle:
    '71 Grabber
    I believe I have found the hole in my radiator, about 3" from the top, and it looks like I might be able to solder it. I'm going to give that a shot in the next couple of days. If it doesn't hold, I'll buy a radiator in the next week or so...
     

Share This Page