Separate names with a comma.
Aod cross member done, bought a new gas tank and had a local guy weld a fox mustang gas tank sump too. Summit street and strip front shocks done too.
Anybody here used the lokar column (cable) shifter kit, Ford aod with hooker 2901 headers? I'm just trying to used the original column shifter.
I went ahead and built my Ford aod transmission crossmember, went to a local steel warehouse and bought 1' , 2"x4" square tubing, 2" 1"x2" square...
I'm looking for one 70 Maverick 5.0, AOD TRANS. YOU still selling them? Let me know thanks
Motor and aod transmission are in, Edge 9.5" 3400 stall converter. Now just trying to figure out how to fab or adapt the trans cross member.
Debating to keep the stock gas tank or a 15 gallon fuel cell for my 70. Dont really like all those emission hoses that it has on the top side.
Got tires installed on the rims with the poverty caps, love the look.
I just did the front disc swap on my 70 maverick, rear drums, Im also doing the Biondo line lock, my question is do I need to replaced the brake...
Strange and TBM Brakes also make light weight brake set ups
My 73 Comet wearing smoothies 15x5 205-70-15 and rears 15x8 4.25" B.S. wearing 275-60-15 nitto drag radials, rear is a 9"
Just bought my wheel ventiques 15x5 and 15x8, From summit. Tires will be 205 70 15 and Nittos 275 60 15's. Love the dog dish poverty caps look.
Is that wilwood MC for disc drum brakes? Looks nice.
What headers are those? Nice engine
Yukon third member is in, new drum brakes, Detroit locker, 4.11 gears and Quick Performance 31 splibe axles.
I actually thought the brackets and pulleys were from a crown Vic. Thanks for telling me they are different parts from different vehicles. To be...
Just bought some new drum brakes and drums for the rear, also Summit alternator brackets to run a fox mustang CW serpentine belt system. Just...
My 73 comet 347 had something like this. Actually good price too...
I just bought one for my 306, it didnt fit it was way off on the back to seal. I returned it and give them bad feed back fir bad service n not...
If any of you in thinking about buying the Scott drake oil pan "Boss 302 front sump" You need to tack weld the tray, is poorly welded to the pan,...
Assembling the short block, was gonna do a stroker but decide just to built a 306" with afr's heads for now.
