Separate names with a comma.
Have you made it to the track yet? If so what kind of times did it run 1/8 mile or 1/4 mile ?
I just have a ladder bar set up on the car ,but I put wheelie bar on because I have way to much money in my headers.Custom made for my car only...
It has a 418 windsor with a 950 carb and a 5.14 gear ,no power adders all motor.It used to average 1.33 60ft with a c4 but it now has a turbo 400...
Got to go to the track at Norwalk in April Spring warm up ,was there all day and only got one pass.Good thing was it was the best pass car ever...
Went to Norwalk for the spring opener first nice day in ohio, only got two passes in .It was 4hrs between passes went 9.98 @ 133 mph,need to...
These heads flowed 350 @ 700 lift at FOX LAKE
I ran a old set of well ported 206 twisted wedge R heads and made 692 HP 545 ft lbs torq at 7300 rpm about one second faster in the 1/4 mile over...
What heads are you going to run on your 418?
1/4 mile 9.99 @ 134 mph
Hotrock glad we got to meet at Quaker the weekend your car was skating around on the radials. That was my first 1/4 mi passes with 418w went 10.02...
Can't wait to here what it runs, have fun!
Went 1/4 mi. for the first time with 418w ,good and bad ,1.32 60 ft went hard right corrected it but went 1st to third gear 10.02 et on the rev...
Iam going to try to get out yet this year ,working on getting trans fixed as we speak.Maybe a 9.80 in the 1/4 mi. with a fresh trans?
looks like somebodys having fun, neat picture.
Where do you live ? Shipping can be a problem,I have a fiberglass grabber hood for sale.
273 intake, 276 exhaust @ .050 with 1.70 rockers .744 intake, .742 exhaust lift.
Rick are you still running E 85 in the car now ? What do you like about E 85 ? I am thinking about a 4.86 because I run more 1/8 mile than 1/4 mile.
Yes but just for a test and tune to see what rpm it will go threw at before I change gears .
I only had one 9 in pig and it was a 5.38 it worked ok for my 347 left at 4500 and shifted at 6800 and went threw at 6800.We did some numbers with...
