Separate names with a comma.
1983 is the year for the one-piece seal, I think.
It kills low-end torque. Comp Cams makes a box upper or you could get a Spyder intake. (90 degree elbow on a Victor Jr. Intake)
Thanks for the link, I may be moving out to Cleburne in the not too distant future.
I know this might kill low end torque a bit, but have you considered a box upper?
It will fit. I put on the stock air cleaner when I take my '77 for inspection just in case they look under the hood. I think I still have to use...
I see the 88400s have been tried with manual steering and floor shift, but how about power steering and a column shift?
I pulled a wheel off a early '80s Mustang that is an exact copy. I want to say it was an '84 GL or GLX, whichever is the right trim designation....
I'd be interested in this article. I'm gearing up to do the heater core in my '77.
I'm having two issues with my '77 Maverick that I need help with. First off, driver's side front door latch, its a four-door. The latch is...
I'm about to replace the heater core in my '77 Maverick. Its a 302 with A/C. Any tips or advice? I have the '77 Ford shop manual, that's what...
I've been searching around for a smaller diameter steering wheel for my '77 Maverick. Specifically the Mustang II or Maverick Stallion wheels,...
http://www.addco.net/index.shtml
You wouldn't happen to know what diameter that wheel is, would you? I'm looking for a smaller than stock diameter wheel for my Maverick.
You might try a set of Fox body Mustang wheels.
recently rebuilt my Carter YF on my 250. It runs great, except for an odd problem I've never encountered before. Coming to a stop, the idle will...
I'm looking for options to replace the felt window channel liner in my '77 Maverick four-door. All I find is two-door weatherstripping for sale,...
