Separate names with a comma.
Have you considered a 4R70W swap? Need a control box or other solution like manual valve body. Stronger than most AODs save for true competition...
I also have a pair of same style US mag 15X8 rims with 255/60/15 ET streets for street car nights at MIR. Save for manufacturer differences, they...
These are US mag 17X8 and 17X7. Tires are Kumho 255/50R17 and 225/45R17. 1/2" drop on the rear and ~ 3/4 coil cut out up front. [ATTACH]
If not a standard available part (google?) you could get a pair of axles made to order, but if you're sticking with 4 lug, why wouldn't the...
Thanks the replies.
I found a local listing for a 66 mustang rear disc conversion kit. The ad says, "used rear disc brake conversion kit. in great shape , just...
I wouldn't think 3-6 months of sitting would hurt anything but, I'd ask the manufacturer if you're concerned. If they don't know ...
Here's some pics of the 2 1/2 " mandrel bent exhaust Bruce fabbed from a '65 mustang kit (I think 65) he had in his shop attic. I also added...
Here's a couple of pics of the remote oil filter setup.
No pics. I'll have to take some ... but it's straight forward. You need two adaptors, one that goes on the block and one wherever you want the oil...
Correct ... no clearance with the Crites. 8 inch with a Richmond 4.11 and the trac-lok locker.
Pictures of the wheel and tire install and lowering the car. Wheels before and after. These are US mag 17X8 and 17X7. Tires are Kumho 255/50R17...
Here are the engine bay pics I have. This was before the remote oil setup was installed.
I forgot to add, on the oil filter setup (with the Crite's), I started out with an adaptor and a very short filter, but I switched to a remote...
4.11 gear On the crites headers ... we needed to grind down some bolts and clearance one of those "humps" from the shock tower. Not ideal but it...
Thanks for the interest. The car is not finished ... but it has been on the road for the last 4 years. It's still patchy primer grey LOL. I'll...
I have the Hooker MAXflows with Crites headers behind a 351 and 2 1/2 mandrel bent straight out the back. These had the best idle and 2000 RPM...
On the Ultraseal Floor Muffler stuff ... I don't think I would use this without personal experience recommendations, but I did find it for $40...
Maybe they need to sell it to pay their taxes:rolleyes:
Maybe more and more of them are finding permanent homes.:yup:
