Separate names with a comma.
Lokar is a good place to look for ebrake equipment. Their stuff is quality and built really well. I bought my stuff off of the Summit Racing web...
I recently finished my sub-frame connector install. I had to convert my e-brake system from the foot/pedal type (77') to a floor mounted system...
Thanks! I'll put the pan removal on my list of things to do and see what's going on. I didn't leave the linkage on the transmission when i...
Thanks for the input. I took the linkage off and tested the column shift and it's mechanisms seem to be working fine. The lever on the...
I've read occasionally about an issue with the C4 transmission Park gear liking to 'slip' easily out of position and go into reverse. Mine...
That big chrome front bumper! (The rear too..) *assuming A tear comes to the eye when I see a 4-door in the yard... :(
I have one and have a separate install thread going here but it hasn't been updated in awhile. I'm still tweaking things on my setup before I...
I got a shift link to work for my column shifter with hooker headers, but it's not that fun. Keep in mind, this is an experimental project. I...
I Think That Scooper77515 Is Fantastically Fun! :tup:
Checking my spreadsheets of my fantasy builds that has rpm guesses - Unsure of what model T5 you have, a model with either the .68 or .78 final...
The RPM is also going to depend on your tire size, like others have mentioned. My tires are 24" and with the C4 and 3:55 gears I do 3000rpm @ 60....
That tube is the modified shift link between the transmission and column shift. The stock rod can't make the bend around the headers so it had to...
Well, it's almost there. The rack is mounted, steering column modded, shift linkage almost done, and PS pump bolted down. Unisteer had sent two...
Wow, that sure is nice! Thanks for the pics. The things that can be done with this...
Good info! Was the price reasonable or did it seem kind of steep? (not asking to spill the $$ amount) I'm going to have to see if there's any...
Anybody try this? I've just now seen this and it's pretty darn amazing. The things that can be done with this just like how they do the wheels....
So an update for this week... I'm gonna need to change my muffler bearings and check the headlight fluid after this is done... a casual note to...
I'll later update the first posting once I have more pertinent/concrete information to add. Today was slow. Once the bolts were being removed...
There you have it! Don't be an uneducated tool like me when it comes to starters and get a 9301 off the bat. I would have tried the ebay route...
It might be worth a try if one can be obtained for not that much $$. The new starter costs a pretty penny. The R&P butted up against the stock...
