Very nice numbers...Congrats!
The roof liner is all that is left inside...no original dash left in the car...steering is changed and most of the wiring harness is gone!...
Ok here are a few I have...have video but not sure how to put on here...if your on facebook they are on "Miller Racing" page...go there and like...
As you can see we had to masage the shock towers a little more to get it in!
It comes in at 2650 pounds with me and 5 gallons of pump fuel...
I used Victor jrs and same intake...Pro Systems 950HP carb spec for the car!
Ok it is a stock 351 block 60 over with scat crank and hbeam rods with JE SRP forged pistons! Solid flat tappet cam capable of 7500 rpm. C4 with...
Well what would ya like to know? Also thanks all!
http://www.luskvilledragway.com/newsb.htm Well we made the local track news page! :cool:
Wow what a great day this was for us...we set personal best and got to the 4th round too! ET 10.25 MPH 128.6 and 60 ft 1.35 pulls hard and...
Glasstek http://www.glasstek.com/ real good quality well packaged on delivery! I have the front clip and the Doors!
make 6901s work in progress! A few pics taken today...lot of changes
Making the 6901s fit with the 399 stroker!
hope this works....
819 | Flickr - Photo Sharing! Anyone here know this car? just saw its a Comet! Nice wheels up!
5-134x u-joint was what I used today to put one in with my 9"...but better to measure and be sure!
1011-2 http://www.summitracing.com/parts/FEL-10112/ I think this is the one you should be useing?
[media]
Each inch of tire is worth 200-300 rpm...60 ft depends on a lot of factors...stage..rollout and of course what rpm your leaving the line at!
Curious what everyone is running at the track...I have been M/T 10.5W and that is the biggest I could fit! Been wanting to try others but wanted...
Separate names with a comma.
