Separate names with a comma.
After reading and seeing how awesome the aje suspension system is I ordered it for my car. Later on I was doing more reading on them and in that...
Right on, The pistons are actually solid underneath so right now the thinnest spot is the valve reliefs and after having the domes milled off the...
I pulled the engine apart and did the math on it all. My 12.5:1 engine is in fact a 11.16:1 engine. From what I have read 7.5 cc is worth a point...
Thank you guys for the input. Dude; I`ve thought of replacing the pistons and having the assembly rebalanced. Just trying to get some ideas before...
I believe I am getting a good deal on a 451 with 12.5 compression. The down side is that is has 12.5:1 compression. What would be the best/cost...
I did some trading with a guy a while back and ended up with a really nice chrome gill. I don`t think that I`ve seen one on one of these cars...
I just saw you are running a two barrel holley check out the http://www.hangar18fabrication.com/blowthru.html also check out "the crutch" wich is...
To boost reference the stock pump you will need to jb weld a piece of 3/16 brake line in the weep hole and plug the other side if it is a through...
Thanks for the replies ! I guess I`ll get the alignment checked to be sure i`m not over looking something simple. The steering box has a little...
Hey guys, I brought my maverick up to gateway the other night to see how it would run but I never got a good run in. No matter what I did the car...
Thank you sir. When I built the model of my four door I used an amt 67 mustang kit for the engine bay and frame, turned out pretty good [IMG]
I rebuilt an old johan glue bomb a few months ago figured I would share some pictures. I cut out the gm style inner fenders added the correct...
... keeping the blower and I`m having a custom cam ground. I`m going to step up to forged pistons also
I know the carb and cam were both holding it back big time in na form but do you think the carb is holding it back with the blower pushing through...
I have my motor back out of the car due to a cracked piston (clogged filter + boost while playing, oops) and while its out I would like to re cam...
I have a full manual forward shift valve body I would sell as for you`r question it is not difficult to put a shift kit in you`r vb just make sure...
I`m not sure of my hp level ... alot ? 347 afr heads and 7 psi so 400-450 ??? daily driven race car , 3.55 gears 26 inch tall tires. Looks like...
I have had it with my C4 and its problems . I have decided to swap it a tremec five or even possibly a six speed . There seems to be a few...
I used 3/16 2x2 I believe it is plenty stout. I can jack the car up in the middle and there is no bowing or flexing that I can tell.
Thanks guys ! I`m going with the lower gear not so much for the quicker 1/4 mile time but because it came with the free 3rd member. I put a wide...
