Found this looking on YouTube. Even though I own Fords I'm not a fan of Ford or their sorted history. [MEDIA]
I've been looking at various spacers metal and plastic and I'm going with a 1/2 inch plastic spacer. Plastic wont transfer heat like a metal one...
Thanks guys for all the input, I was leaning on the carb spacer because I didn't want to lose and breathing space. I do have room.
Well currently I'm running a 3x14 air cleaner on my 302. As of late I have been replacing and upgrading my motor components. One of the parts I...
Front brakes, getting the proper spring set has been an issue, still have drums for now. The Beast was garaged for the last 18yrs and not ran....
Thanks for the info guys, I went with the MSD 6201 6A for about 277.00 to replace the old 6200 I installed in 1985. I did replace the distributor...
Greasemonkey said; The only reason to even run one of those fancy boxes is for the rev limiter. If you don't feel the need for that I'd just run a...
Hi guys I have a question about the 6201 MSD box as a replacement for the 6200. I currently have a 6200 on my 1971 Mav Grabber w/302 that I...
Well kind of a necro post but still worth posting. In 1982 I was attached to the USS Kitty Hawk CV-63, Hole Snipe. After our last West Pac the...
Thanks , the part as shown is the replacement part but I will contact Nick to make sure, thanks Dave
The hoses are original to the vehicle and most likely the problem, I'm impressed with all the help I'm getting here, much thanks to you guys.
I actually removed the bleeder valve completely and no fluid came out under pressure. Sounds more and more the soft line has collapsed, thanks...
This will be the first thing I do really didn't want to replace the slave, thanks for the help.
How do I determine if this has happened? In the next week or so I will be able to pull the wheel and inspect the slave proper.
Obviously these are inserted where the original bleeder valves are so do I need to use a vacuum pump? I'm using a hand vacuum pump now as well as...
The vehicle has been pulling left for years, I brought it to a few mechanics and the problem was never fixed. I guess I can be blamed but at the...
Thanks tody I'll try Rockauto. I removed the bleeder screw completely and no fluid would come out under pressure and the break line is not...
Hey guys just replaced the master cylinder in my Grabber and while bleeding the breaks the front right would not bleed. I'm still running drums...
Well if it makes my OG Grabber worth more I'm good with that, but purchasing one would be a big fat... no.
I've never heard of running a line into the bottom of the tank but this is the first time for me and it seemed to be the safest rout, if I drop...
Separate names with a comma.
