Separate names with a comma.
hangers Well after that pic was taken, I drove the car for a while and then added additional hangers right in the U part of the bend. This got...
pics Well good luck with the springs. Do you know how much they will lower the ride? and what does the 620lbs denote, the ride quality or the...
T-5 Thanks for the help, but I'm almost positive that Charlie has a T-5, in fact he's been trying to work on a late model mustang bellhousing for...
does it work? How can I know if the unit is working? My buddy told me the way to check is to put it under a load. Any other way? The...
ok, i'll fess up. OK, call me greedy, but I didn't want to say I found it on eBay, but here's the link:...
Yehaa! Yep, thats what I thought. So now I've got to see how much the guy wants for it and maybe I can get it for less that $300. Any opinions?
ok guys, I know some of you have been in the game forever. So I have looked at an 8" rearend pumpkin and the code is: WCZ-C1 3L00 78B 932. I know...
Why If you're wondering what all the bends at the end are for, well I didn't want to buy same side in and out mufflers, $180 apiece, but I wanted...
just to much trouble I'm pretty much decided its not worth the effort and cost to get the 9. If in the future i break this 8, then it'll be time...
2nd one Again. Had to wait 60 seconds and lost the pic link.
2nd one From the other end.
Well I had my car on a lift today and since I've seen questions about running 2 1/2" pipe, I thought I'd take some pics and show mine off. I good...
good deal actually I had looked at just buying a new posi pumpkin for my 8", but this looks to be a good deal, i.e. cheap! So depending on the...
OK, this isn't something i know about so I'm asking. I have the opportunity to buy a 9" rear, 3.73, 31 spline, auburn posi. Axles too. I do...
72 axle length? Can you or someone answer the same question for a 72 Comet? I have the opportunity to buy a 9" w/ posi and 3.73, 31 spline...
Suggestions Well, what I can suggest is to look maybe at the BF Goodrich for instance, and look at their 14" tire selections. I know that the...
I'm looking for an overdrive tranny. Probably a Tremec, will it fit in the trans tunnel? I know about mods to the x-member, driveshaft, etc. I...
Something on the page now Well at least there's a main page now, but its nothing like it was...no links or anything.
go bigger I've got the 14x7s on the front of mine, and I'm running 225/60s. I like it. www.mindspring.com/~imaslacker/cometpictures
Very nice Well, I can't compliment you enough on the job you've done, but I am curious for engine specs now. Great job Jonathan
