Separate names with a comma.
Okay, thanks for the comments. Sounds like you can be successful, but have to be careful in the process. When you sell something on eBay, what...
Merry Christmas fellow gearheads. I put a for sale thread in the cars/parts for sale area a couple months ago and haven't had much activity....
I don't know if the bushings (Ford calls them insulators) for an I-6 are the same, but here's a picture of the ones I used.
I just put new bushings on the linkage of my 70 and it shifts like a new car. There are two sizes and Ford still carries them. Here are the part...
In the past I've used a headlight warning buzzer that cost about 5 bucks. Not sure where I bought it, either WalMart, or a local auto parts...
Ditto Craig. Since I bought a Maverick back in 2000 you have always been there with great advice on anything Maverick related. Also, I...
Rob: If you can't find the parts locally, try Wes. He got the parts for me and they were an exact fit. Tom
When I was tightening the backing plate to the splindle, two of the "t" end bolts turned and bent the "cover plate" (for lack of a better term) in...
All parts, other then bearings, are original. Thanks for the ideas, I'll try again this afternoon.
I had the coils, a-frames, spindles, etc. pulled off my 70 to install a Mustang front end kit from American Pony Car. Figured what the heck,...
The nuts that push in the hex holes in the bottom of the frame rail are called "crush nuts." They're about 3/4" of an inch high and when you...
Elk Hunter: You may not have to weld nuts to the frame. You can get power steering cylinder bracket to frame nuts from any Mustang catalog For...
I'm not having much luck finding vinyl paint. Does anyone have a brand name and part number? Thanks.
how do you wash a car cover I bought a cover from AutoKrafters, it works great. After pulling the engine, scraping undercoating from the eng....
The Ford Six website has all kinds of discussion threads re: upgrading a 6 to duraspark. http://fordsix.com/forum/ Also, the website...
My first Mav was a 70 (robin's egg blue exterior, dark blue interior) with a 200 six/C-4. I was stationed at Camp Lejeune, North Carolina at the...
Ditto Maverick Guy's recommendation to visit the Ford Six Performance website. One thing most people do is add a port divider. The two middle...
Getting ready to paint the engine compartment so I removed the speedo cable & housing. Took the cable out and it was dry. The shop manual says...
This week's Hot Rod TV features the 71 Maverick of Ray Vaughn (Hoschiton, Georgia). Unique paint color -- 69 Camaro Hugger Orange.
UPDATE: Picked up the brake hoses. The guy was able to use the existing fittings and just replace the hoses. It's kinda of hard to explain,...
