Separate names with a comma.
Hey Jim.. the original owner, Peanut passed away some time ago. the guy we purchased it from got it from the family. I recall him saying that he...
yeps I'm sure. You want to get to the metal and prime with dp-90 or the like. 80 grit is what they recommend for the dp-90 and then you spray a...
I use 60 grit to strip it down to pretty much metal, then 80 grit for a finish sand. Epoxy primer over that.
I don't know if it 'usual" but our Comet has pretty much the same rust, only not as severe as yours in some areas... keep up the great work!
I just had a pair of doors shipped from colorado to south carolina via greyhound bus, they came in about $90 each for shipping. I too have the rot...
You have to pull a vacuum on the system with a pump and gauges, are you using a true set of gauges and a pump or just the refrigerant from the...
73 what, mav or comet? If a comet..that crappy fiberglass hood scoop is probably the stock scoop and can bring a nice coin when sold ;)
I prefer to use 1/4 inch Luan to build the panels out of. My days of custom car audio and recessed amplifiers comes to mind. Something I would...
I used it on the rear upper shock mounts on the project 72 and I will use it on a few other small prts throughout the car as well. I have also...
WOW... love that color on the Mav!
I'm right there with ya ;) I do have to say that it was definitely easier to slip shift when I had the centerforce, pedal pressure was LIGHT.
Thanks alot!
I can also vouch for them being hard, harder than stock, but handled 400 hp 5500 rpm sidesteps quite well ;)
We are missing it on our project 72. Is there a Lokar part that fits/works well, and bracketry needed? Pics of your setup would be helpful. I'm...
That passes tech in your area... certainly wouldn't pass here or most areas... For your safety I would put those in vented boxes as batteries...
Ya'll need to move to upstate SC, e85 has been plentiful around here for probably 6 years, you can get it pretty much anywhere.
looks pretty damn good if I say so myself!
No.. i just pulled a set of Gabriel airshocks (the previous owner put them on prior to 1993 when the car was last registered)off our project car...
Looks about like what I just got finished repairing. Pretty much the same places and about the same amount of rust, you have one section on the...
easy fix... I'm replacing both quarters here in the next week or so on the 72 GT.. Do a search on eBay for this seller: ica997 I know he has a...
