Separate names with a comma.
Also had to massage front of inner fender with a big hammer for both sizes.
I had 15 x 8 drag lites with 4.5 backspace with 275 50 15 Futura GLS tire tires rubbed when mounted added 1/4 spacer and I could not get my...
I put in mustangs plus 720 springs really stiff and cut I think 1 1/4 or 1 1/2 off and the rear is stock leafs probably a little saggy. Also I...
You can use the joe gibbs oil for break in it is very good just expensive. I know a race team that is all they use not just for break in.
As an engine builder I can say your last statement is about what we tell our customers. We use standard 10w30 with comp cams additive (and...
I have 255 40 18 fronts and 275 35 18 rears, 18x9.5 front rims and 18x10 rears. Fronts have a slight rub in the inner subframe @ full lock but...
It was at Goodguys in Pleasanton CA, last show of the year there.
Here is my autocross video Turbo 2.3 Maverick autocross video - YouTube by fuelish351 posted Feb 8, 2015 at 10:42 PMHere is my autocros
Turbo 2.3 T5 from 88 Ford turbo coupe 18" fr500 255 front 275 rear. Boport 1.5 big valves only 10 psi of boos (ignition problems) gets good @ 24...
Do you have a pic of the grabber cowl hood on your car
I am also into autocrossing my Maverick wherever and whenever I can, mostly goodguys made it into the gazette one month. It is quite a chore...
I have been looking for a decent rear bumper that one looks really good would you be willing to get it and ship it to me? do you know how much...
That was my car that you saw in Pleasanton I saw you drive by I think I was loading my twins otherwise I thought I nodded back. I saw your car in...
I saw one that had a grabber spoiler with old school cragars, it looked muscley for a 4 door
I was just debating buying some better aftermarket axles or finding some good used ones. Also any recommendations on aftermarket axles? here is...
Are stock 8" axle shafts inherently weak. I barely grazed a curb while doing donuts and the axle is bent at the time the other one was not, I...
If you have a welder you can build up a weld on the easy out then use some vise grips and twist it out the opposite way ( to remove the easy out...
So I got my intercooler figured out/mocked up, figuring out the charge pipes. got all the exhaust/wastegate/dump pipe done in final mock up just a...
do the 351 heads have hardened seats? It will need them if you plan on driving the car a lot otherwise the valves will sink into the head and run...
Im in San Jose
