Separate names with a comma.
I tried without spacers originally and I didn't clear the idler arm. In the rear, the tires don't clear the springs. I'm only using a one inch...
The car is a four door and I think the six is more appropriate. If I had a coupe, I wouldn't think twice about a 302. I want a nice gurgle with...
The car is a four door and I think the six is more appropriate. If I had a coupe I wouldn't think twice about a 302. I want a nice gurgle a some...
Just want to put this out there. Has anyone had experience (good or bad) turning there .250 single barrel intake into a true two barrel? Want some...
This is the stance with a 2 inch spacer. Are you saying that I don't need to roll the fenders with 16" x 7.5", 5 Lug, 4.5" Bolt Pattern? I've...
Thanks for taking the time to give me this information. I will copy and paste these few paragraphs into my journal. By the way these are the...
The rolling will be part of the body prep before the base coat. Everything will get a rust proof treatment and sealer. These will be the wheels i...
Got it done THANK YOU!
[ATTACH] This is the image I was talking about. I am getting the newsletter and thought I am a member.
Are the doors the same for a Comet as they are for a Maverick? Four door car Maverick 1974.
How come I don't have my membership logo posted along with my threads?
I've watched some YouTube vids on rolling and when I'm ready I'll try the baseball bat method. The guy was a little goofy but I got the basic idea...
Are there any youtube vids on the process? Is it a hairdryer type gun or a torch? If I go to Harbor Freight website, how would I find it? I like...
Fender rolling is it a DIY or Professional modification? Want to drop the front stance and have clearance for the wheels.
I've been putting this task off for a while now, but it has to be done. I have the car prepped down to windshield removal. I don't know how or...
What did you do to repair the rust from under the front lip?
You might want to consider undercoating the inside floor pans while you have the carpet out. You can never have too much protection on that old metal.
