Pulley Set-up..... Suggestions anyone??

I want to remove my power steering pump but right now it's turning my waterpump, what pulleys is anyone using that will allow me to line the alt, water-pump and crank up so i can use jus 1 belt?? I want to stick with the v-belt..... 71, 302, no/AC..

 

http://m.summitracing.com/parts/MCH-1670?ibanner=MobileSwitchYes

This is what I used, not v belt though.

 

I'm running March pulleys. Water pump, alt, crank...

 

I like it, alot!!!! where did you get it and did you have any issues with altenator alignment??

 

Use the link I posted, same setup. There is no problem with alternator, everything lines up perfectly.

 

You can buy it through summit for 200.

 

I had to shim the alt pulley out maybe .090 and make some different stand-offs for it(alt bracket) to fit...but I did it the hard way...early balancer,late water pump...

 

http://www.cvfracing.com/Ford-Small-Block-Kit-4-Bolt-Crank-CVF-Bracket-p/sbfl1kit-cvf.htm

This is the kit i am using. I got the black anodized ones. No spacers need, bolted right up. They have 2 different kits for sbf. One has setup for 1 1/2 inch alternator spacer and one for 2 1/2 inch spacer.