Dual Outlet Inline 6 Headers Sound Good?

I installed some dual outlet headers on my 71 comet with a inline 6 think they sound pretty good.

I uploaded a video check it out tell me what you think.

 

Sounds good!

What mufflers are you using and are you using an 'x' or 'h' style crossover pipe?

 

off idle up it sounds a little raspy...JMO

 

Sounds pretty good

 

What is there to cross over?

 

Sounds better than I thought it would. Not as good as a V-8, but not terrible either.

 

Oh yeah. I have a x pipe and flowmaster super 44 and a 40 deltaflow. Yeah i have 2 diffrent types of mufflers. The right side sounds not as loud thats it.

 

Its a dual outlet header. So 3 cyl for each pipe basically.

 

Yeah agree a bit raspy. If i lower timing it gets a nice rumble. Ill upload it another day.
And what do u mean by off idle?

 

when you bring up the RPMs....

 

Sounds nice! I like it.

 

Sounds great, is the engine stock?

I'd like to hear what it would sound like with a somewhat bigger camshaft. There are plenty of examples of v8 cam and headers in a split configuration but not so much an inline six.

 

I ran those headers for about a decade on a stock 250 with a Weber on top. I had to cut them out when they rusted through. It took a stack of Saws All blades to get through them. I dragged those headers over every speed bump I encountered.

They sounded decent. Most people thought I had a V8 in it. I had a crossover but I cannot recall who made the muffler.

Cant see your video to compare.

Micah

 

Only has a petronix ignition amd headers everything else is stock. Later down the road im going to install a cam and a 2barrel carb just need to do more research.

 

Mine is a 250 and have plenty of room for everything. It is a bit close to the starter i would say about a inch away from it.