HI EVERYONE I AM NEW TO THIS SITE. I JUST BOUGHT A 71 MAVERICK GRABBER BLUE WITH A 200 CI 6 CYL 3 ON THE TREE. THE PROBLEM I AM HAVING WITH THE CAR IS THAT THE CLUTCH CHATTERS OR SLIPS MOSTLY IN 1ST GEAR. I TRYED ADJUSTING IT BUT HAVE HAD NO LUCK. I HAVE CALLED LOCAL PARTS HOUSES LOOKING FOR A CLUCH KIT AND NO ONE HAS ONE. DOES ANYONE HAVE ANY SUGGESTIONS WHERE I COULD FIND ONE? EVEDENTLY THE BOOKS ONLY GO BACK TO 73. I BELIVE THIS SHOULD BE A VERY COMMON CLUTCH? ANYWAY THANKS FOR ANY HELP YOU CAN GIVE ME.
napa has a remanufactured clutch disc for a 200 for $34.15. check napa online to get the part numbers. looks like the 170 and the 200 use the same one.
Howdy and To do a proper clutch job, get a clutch, pressure plate, a throw out bearing, and a pilot bearing. While you have the trans out, pull the flywheel and have it resurfaced. Check the front bearing in the transmission too.
thanks for the help thanks for the help guys. Ifound the parts at napa. I am going to replace the rear main. anyway thanks and see ya on the flip side.
