31/10.5w fit under maverick

If you minitub a maverick and use ladder bar coil overs will a M/T31 10.5 w fit under a maverick?Did not want to back half car at this time.

 

It would be close, I have frame notched and have true 10.5 with not alot of room left??!!

 

the front to rear of the wheelwell is where your problem will be...
I got a true 29.5x 10.5, and its very tight front to back with out a lil trimming...

 

I have tried a 29.5x9 and they hit on the top end, made a small grove in the center of the tire. These tires grow taller when they get rolling.

I have 28x15x10.5 with a 3.5 back space wheel and the only thing I had to do make them fit was trim off the outer lip of the fender.

I hope this helps.

Bossmav

 

I've got 10.50-29s under mine,(ladder bar coilover) and you need to modify the front part of the inner w/house and cut the snubber brackets off and they will fit,no rail or floor mods needed.

 

Yes,different brands are sized differently,mine are actually 10" tread and 13' section width (measured)

 

I guess the big factor here is ride height.

Alot of tires can fit, but is the car hiked up in the back???

 

I've got 315/60/15 That are 31 tall and about 14-14.5 overall under mine, with a mini tub and frame notch. This pic is with a 30x12.5x15 et street.

 

Here's a 31x13.5 m/t it's real tight!

 

I'm sure everyone would agree......post up some detailed pics of your car. The engine bay looks interesting.

 

desided to back half car

going to back half car wih mustang 2 frontend will be using fiberglass nose and doors .will have stock parts if any one needs them . useing 72 body thanks every one for info mike