i have a t10 sideloader from a 65-66 mustang and hurst doesnt make the installation kit for the trans anymore they do make the shifter but not any of the linkage. i was wondering has anyone used the stock linkage with a hurst competition shifter??? i have found a stock shifter and linkage on ebay but i heard that the stock ( even if rebuilt) isnt good at all ( all im using my car for is a daily driver with mild performance) so im trying to find a hurst shifter.
You can buy the linkage from Summit and bend it to fit but have to make your own adapter plate. I did have the part numbers, I will look for them and let you know IF I find them.
thats what i was told on the mustang forum i joined for the trans i just dont know which installation kit will get the linkage to be the closest for the least about of fab work. will the top loader kit for the 65-66 mustang be the closest? since the mounting place is the same on my side loader at the rear of the tail shaft?
my friend just took the side lader out of his 65 stang to use a top loader,i will see if he has the linkage.
http://www.jegs.com/i/Hurst/530/373-5587/10002/-1?parentProductId=749299 fits this shifter http://www.jegs.com/i/Hurst/530/391-3180/10002/-1
http://www.jegs.com/p/Hurst/Hurst-Street-Super-Shifter/748683/10002/-1 That is the shifter I am running on my toploader. It's a 65 mustang toploader in a 72 grabber. You will need some slight floor pan modifications to make everything fit nicely, but nothing extreme.
