Just ordered a spare set for mine 15". I all-ready have the same blades installed, work and look just fine.
I believe the car belongs to a member on the board here-
I have one that I bought from Summit Racing- Scott Drake Hump Hugger Consoles HH-BK . In my car it fits very well and its secured to floor with...
Thanks and glad it helped.
I have Halibrand Replica rims 15 x 4.5 with 2" backspacing with a 165-80 R 15 Nexen SB 802 on the front and on the rear is a 15 x 8 with 4"...
I have 0K91U190316 which I believe to be a 69.5. Title says 1970
Thats what I was thinking also. I might be running out to Summit to get another fan looking at a 2400 cfm. Thanks
16" fan with full metal shroud-puller fan 1610 cfm
I'll have to look into that.
So here is what I have
Engine- 331 Stroker -compression approx 9.75
Cylinder heads- Pro-maxx Max 175- 60cc- 2.020 intake-1.600exh-intake port...
I maybe mistaken but I believe these are steel shims and not head gaskets. They are used to correct deck height. Just my 2 cents worth.
Thanks to everyone that responded, for now engine is on hold till exhaust gets done-mufflers have been ordered.
When I took mine out for the first and only time it did not puck and fart it ran very well it actually scared me a little. So use to driving newer...
Thanks for your input but the engine is in the car and I have been using 93 octane fuel. What if I were to change out the rear gears to say 3.80...
Thanks-So how is your car to drive on the street
Thanks Krazy. I really need to drive the car to see how it will react and if I can live with it but I have no exhaust for it and the weather is...
Looking for opinions, this is a new build about 1 hour run time and went down the street once with it open headers.
My goal was to have a healthy...
But I can't take credit for the braces I bought them from TOPORANGER he was having them made to his design.
Separate names with a comma.