...what I had to do to get my Griffen cross flow radiator and Taurus fan in. The radiator only has about 1/2" to the frame rails on either side....
I was going to go the taurus fan route, but they're such a tight fit, and my rings are gapped for boost, someday I'll find a used supercharger....
...require an alternator upgrade, as they only put out 60amps, a Taurus fan draws 20-25amps on high speed. But yeah... Electric fans are great at...
...gas and don't come anywhere close to moving as much air as my Taurus fan, especially at low engine speeds. Had one fly apart once, took out the...
I had overheating with my 347. New stock radiator and the Taurus fan conversion still would not keep it cool. I ended up having a custom radiator...
It sounds to me like you need more cfm, something in the 3000 range. Many of people on this forum have switched over to Ford Taurus electric fan...
Taurus fan with a stock radiator and Dakota Digital fan controller in front of my EFI 347. Also a serpentine belt. That Taurus fan really sucks...
...output terminal. When mine was connected to the output terminal and my Taurus fan turned on the voltage throughout the car dropped 2 volts.
If you can fit it, a Taurus fan always, but I am partial.
Take the plunge and do a Taurus fan. After doing this, I will never run a water pump mounted fan again.
get rid of the 7 blade flex fan...google it and read the horror stories. you need a shroud... Taurus fan swap.... JMO
For awhile I had only 1/4" clearance between my water pump and Taurus fan motor. Then I slotted the motor mount holes, slid the engine back, and...
...some research I found that some came with the same motor as the Taurus fan ( this is a different model motor but it is just as powerful as the...
Taurus fan here, too, with the biggest Griffin aluminum cross-flow radiator I could fit in. Only have about 1/2" clearance on either side to the...
I installed the CPP upper control arms in my car several years ago and really like them...
I had one of those fiberglass fans fly apart on me many moons ago. Sliced right through the upper radiator hose. Then ran a six blade aftermarket...
My first choice would be the Taurus electric fan upgrade, but if I had to choose between the 2 fans shown, I would use the metal one and toss the...
That’s what I thought. Why is the plastic one junk? I have never used one before so I am uneducated.
...never dreamed I would be using ignition parts from a f150, or a Taurus fan with parts from a Volvo and a BMW, or a GM power steering pump,...
Since we are now ready to hook up the Taurus/Volvo/BMW fan modification, I have been looking more closely at the wiring setup. It looks as if...
Separate names with a comma.
