This problem has persisted using both a Pertronix Ignitor III and a new GM style HEI with a stock GM module in it. My car runs great at 12ยบ...
No, I dont have power brakes, so that isnt it. I've tried disconnecting all my vac lines and plugged them, but the results are the same. I can't...
So do you guys think this is a timing issue or carburetor related, or both. My power valve is good, float/fuel levels are also good. It seems...
Ok, I did some more testing today and I found that when my car is all warmed up, when I hold RPMs at around 1500 where it runs most rough, that if...
I looked in the vendor links but what I saw was old codes that have expired...think you could help point the way? :clap:
I do like the price of those from rockauto... Now I'm just curious if those from 4Wheel Parts will work or not. I'm seeing pros/cons for each...
I can get those Trans-Dapt mounts from 4Wheel Parts for $45.42 out the door. Anyone tried out those mounts from RockAuto? I worry about...
After digging a little more, I think those mounts from 4Wheel Parts might work since I found them on JEGS and they showed them as compatible, as...
Do you guys have any suggestions for a good set of motor mounts that won't cost me ton of money? Will these work? Would I need anything else?...
How many turns out are all of you on your 2100's? I think mines set rich, but I'm looking for ideas where everyone else is at. Also, for us...
I do have mine almost all the way closed, but when firing up cold, the choke pull-off opens it up a little more. Being that it's getting warmer...
I've looked down the throat of the carb when it's acting up but haven't seen any drips. If it's coming from the power valve, would I still be...
Hey guys, I rebuilt my carb over the weekend and now I'm having some strange results. I have adjusted the carb for max vacuum (around 19Hg). 1 -...
Ok, I got the distributor in the mail yesterday and got it installed today at lunch. It took a little work since this distributor is a LOT bigger...
I would prefer the 70's turbines, but I can't seem to find any at a reasonable price. I like the ones that don't have a lot of spokes, like...
These are stock, according to the guy selling them. I don't really want to have to use spacers. I really do want some turbines though!!!!
http://dallas.craigslist.org/mdf/ptd/3794447640.html These are the wheels
How did that make your track width look? Mine already looks narrow with the stock wheels.
Ok it turns out that the wheels are turbines from a jeep and have 5" backspace, not 4-1/2. :cussing: They look awesome and are only $10 each,...
Hey guys I'm looking to buy some 15 X 7 wheels with 4 and 1/2 inch backspace. Do you think that these will fit? For front and back of my car....
Separate names with a comma.
