The tires were spinning for a few seconds then nothing. now I have continuous spinning as long as I am on the gas, then spins back a little in...
Now this is what I have going on now. I adjusted the shift linkage I think that is right. But now when I start the car the rear passenger tire...
Here's what I got now. I snugged up the bands and turned the front band 1 3/4 and the rear 3 turns. When I start the car put it in reverse, hit...
Ok I think I got it narrowed down. I found where the Vac. Mod. goes and hooked it up. I think that the bands are not adjusted properly. I loosen...
All in all the car's exterior is in decent shape save for the bumpers. The front seat on the interior is shot, but everyting else is ok. The frame...
I need some work done on my rear bumper. 77 Mav. It has some rust and a few holes about the size of a golf ball. Also there are old bumper...
OK here's what I got now. I adjusted the inter. and rear bands I can feel the tranny shift gears. I have some movement in the drive range now, but...
I just checked the fluid level after letting run for 20 minutes and according to the dipsick there was no fluid. I have already added 1 gallon and...
The modulator locatede close to the tail housing. I checked the fluid and it seemed fine.
I just rebuilt and installed my C4 tranny into my 77 Mav. Hooked up all the lines and vaccuum modulator there was one vaccuum line that I didn't...
I need to do some welding on my 77 Mav. I need to repair the frame and a few holes in the floor board. I have been told that I need a MIG or TIG...
Reply Where does the manual lever have to be in accordance to the column rod so that I can shift the car properly and the transmission shift...
I am having trouble getting the shifter rod hooked up to the tranny on my 77 mav. How shoud the detent be when the valve body is installed? Where...
sorry I don't mean to sound dumb but what do you mean by jack bolts? I understand taking to bolts and placing them in the threaded holes that hold...
Threaded what holes in the pump or do you make new holes?
Has anyone ever had any trouble removing a front pump from a C4 tranny? how did you remove it? thanks
If I took the bracket for the shifter from a 1968 c4 out of a mustang and switched it with the bracket from my 77 c4 out of my maverick would the...
I have a rebuilt 1968 c4 tranny all put back 2gether. The torque converter turns by hand on the front shaft, but it won't turn by hand at the tail...
looks like I am gonna have to take it out and rebuild the original tranny then. Does anyone know if I can use the parts from the 68 tranny in the...
another question The tranny from the 68 mustang the shifter rod is facing up and the 77 maverick is downward. So does that mean it is a floor...
Separate names with a comma.
