Balance weight could have fallen off flywheel or converter. Seen it happen. Aftermarket replacement parts are the worst for bad welds. did you...
I had customers car in just last week with a mystery coolant loss. I came to the conclusion it was the rad cap. Nope. minor, i mean REAL minor,...
The AIR system employs some one way valves. Check those. you will get exhaust output from the valves when the hoses are disconnected if that/those...
Frame mounts(can be made pretty easily or stolen from a mustang!) Trans crossmember for dual exhaust Headers or manifolds and exhaust. you should...
I posted a thread a while back with pictures of a frankenstein-like hydraulic set up I did. I built all the brackets and such. I used wilwood...
Except if the body is as rough as mine, skip the bath and the wax. parts might fall off. dirt has held the quarter panels on for years.
Probably a module problem. but check easy stuff first. put a test lamp on the coil. crank. does it flash? does it light. No flash but light,...
Double check the ground in the dist is clean. I usually splice a spare ground into that black wire between dist and module to make sure everything...
If you had a simple thermistor that pulled ground at the proper temp(like an idiot light switch but lower temp) you could simplify all of that...
That's a good price. I got my 9 inch from currie but, I wanted the torque sensitive diff. I paid a lot more but I am totally satisfied.
Switch the hazard flasher with the turn flasher. quick diagnostic.
light staying on with head lamps on is probably a bad ground in either LF or LR park lamp. I had the same problem with the right side on my 76...
one of your bulbs may be in backwards or wrong type. i've seen single element bulbs in dual element sockets cause problems. dirty sockets with bad...
I'm with Jamie on that one. It is in REAL nice shape and probably doesn't need any work but you could find a New Mexico or Arizona no rust car and...
Too bad you are not closer to me. I could use a 250 to swap into a fairlane.
They done a fine job! Some people shouldn't own tools.
Door skins and rear wheelhouses are a much need part for me. I don't even want to start on any other part of the body until I fix those.
I need at least a rear. I might keep my 73 front. Still debating it. Didn't realize this thread is a month old. What's the status on these? Any...
Yeah, but, It would be nice to have something a little different. would be especially cooler if was the same as the cursive Mercury like on the...
Not that I've seen. But, if someone had some for sale that were aluminum and raised up for roller rockers I'd have to own a set
Separate names with a comma.
