Like most said you need a marty report. However..... there are a few signs that will quickly tell you its NOT a real GT without question. For...
Nothing about building a car is harder than choosing the color, I struggle with it every time. I suggest pick out three colors and buy two more...
Im surprised at how many people responded without even knowing your overall tire diameter. If you really want the best of both worlds run the...
I didnt think about doing that! Great idea. I guess that makes things a lot easier. thanks
I have been building a 331 stroker, and I'm adding on the powerjection III fuel injection system so I need to weld on an O2 sensor. To avoid...
Now that you mention it, it did have those copper washers on it all the way around. Personally I have never rebuild a rear end and used washers.
What does special order DSO mean? Does this mean the guy who had the car ordered it that way from the factory?
Sounds like a good header. Jegs probably doesnt make their own headers, its probably made by hooker or hedman. When you talk to them ask them who...
See if they list the wall thickness of the metal. I have noticed that the cheaper headers are usually thinner gauge.
Its very odd that the car is a 1972 and both the ring gear and tag are both 72. I just checked the ring gear and it is a 2.79. Im not trying to...
Tag says DSO-D2DA-CA second line says 2L79 8 514A Gears say FORD D2 - 420A WFS is not listed on the tag or the gears
I was cutting up the parts car I had left over and was about to toss the rear end in my metal pile, since it was a 4 lug. I thought just for fun I...
What color is the smoke, black, blue or white?
As bryant mentioned there are too may variables involved. There is no one size fits all unless its a bone stock motor with no changes. If your...
I'm coming to your house for christmas, I never got to pick out my presents :)
Federal Mogul bearings, I have never seen these before but they are listed for a 6 cylinder 173CI and isuzu rodeo's. They are F/M's A series bearings.
I'm getting ready to do a T-5 conversion and dont want to use the ugly T-5 shifter handles. Anyone know which hurst handles look good for more of...
Are you reading off the bearing or the inprint on the rods? Im asking because it looks like a Federal Mogul part number, but their part numbers...
What were the bearing part numbers?
76MAV77: The first thing you need to do is find out which bearings you have to begin with, because the kits can have chevy or ford bearings sizes....
Separate names with a comma.
