I had a guy tell me last week nice Coronet.
Standard grilles are .235" thick GT grilles are .125" thick but not the entire strip is this thin. The depth is about .150", the rest of the...
Will mercury closing make our cars worth more?
I have a set of stainless moldings too. Its true they do not fit stock grills, however they can be made to fit. I have a mill so its easy for me...
First you have to remember that in 72 although the muscle car era was ending, muscle cars were only a few years old. The problem with non hardened...
You need a Flexalite 185 fan with shoud. This will cure your problem. I have used this fan on 3 other vehicals I owned, works great
I have a Mr gasket wheel also. It gets the job done but too small in my opinion. As mentioned bigger is better in this case.
You dont need hardend seats for unleaded gas. Hardened seats didnt come out until 1975. There are still millions of cars running without hardend...
I had the same problem. Turns out it was the turn signal switch in the colum. The plastic wears out and the weight of the lever arm was pulling...
Advanced auto sells them. I bought both mine from there. Their computers are WRONG and they dont have the ability to make changes at the stores...
Very nice, looks clean. 71 is the best year in my opinion too.
[IMG]
That has to be the nicest 6 cylinder I have ever seen. Good job
I have been finishing some things up on my 71 comet Gt restoration and I'm a little unhappy with a few things. Mainly the drivability. Its all...
Here is how I ran my lines. Stock lines are little different but the compressor lines are in different spots so it ran best like this. [IMG] [IMG]
2.79 gears but Im still pushing 3100rpm at 75mph on the highway. The 6 speed transmission has a .80 5th gear and a .50 sixth gear which would be...
My C-4 is not really cutting it for highway use. I have been looking into going with a T56- 6 speed transmission and curious if anyone has done...
You can always narrow the diameter of the tube on the exhaust cut-offs
They told me the same thing about my condensor at first. As long as the fins are there and it holds pressure its considered good. Which is what...
After converting my 71 comet GT to 134a with an engine bay conversion from Classic auto air in Tampa, I ran into a few problems. I quickly found...
Separate names with a comma.
