Crap---too soon! Just put the heads back on yesterday...again. Cometic gaskets this time around. Everything is so close, but we probably won't...
street car When you drive it to the beer joint, grocery store, home depot, McDs and then to the cruise-in every friday and saturday nite after...
Looks fine... and its better to invest a little extra time up frount than to go back and do it over later... use some weld thru primer when ever...
Not sure who this is directed at , but I guess not me !!!
cleaner Mineral spirits or a wax and grease remover. The underlayment is available aftermarket, probably a mustang coupe kit with a few...
pop goes the weasel Benji and all- thanks for the input- I will e-mail you for additional info on your specific set up. I did switch to the...
Damn !!! blew another set of head gaskets ! 4th set. MELs to boot. This time the engine shop guy put the thing back togeather (last fall) Been...
lift You know a cherry picker rents for about 25.00 a day. just another option, maybe a little less work
buy the shop manual. It will explain how to properly set the timning. A couple of degrees will provide a bit more pep, not such a big gas issue.
roundup Crazy Nick passed me by on Fri pm. I was loading up a few things and yelled at him,. That mustard car....he just kept rolling waving out...
looks good Love the color- keep rolling !!!
check Time to check the turn signal switch, HL switch, ect. That turn signal switch can cause a ton of problems...
its a drag link And as noted above, there is no real reason for it to "wear out" . Better double check the diagnosis. jmo
eletrical bugs Check/test the turn signal switch. Lots of stuff runs thru there and when they go bad, goofy things happen. pull hl switch and...
fresh start You didn't give many details about the rebuild, so I will assume you have checked all the electricals, brakes, steering etc. One...
box adjustment Neither of your manuals explains the box adjustment? Anyway, there is a nut on the top of the box. 11/16 th I believe, loosen...
If its pulling to the left when braking..look for a problem on the rt. Check frt wheel bearings, etc also. Vibration sounds like it may be...
bleeders Not to contradict someone elses opinon, but most shop manuals tell you to start at the cylinder farthest from the MC, ie - rt rear, left...
squeal Also - just a thought - did you put a little moly grease in all the right spots? If the pad can't move they will get in a slight angle and...
seal There is no washer between the pitman arm and the bottom of the box. That 1/4 inch space is about right. Are you sure you got the seal in...
Separate names with a comma.
