What kind of carb?.....Make sure the timing is on the money and there aren't any vacuum leaks too
Than that's different than the CNC unit being used here...Sure, i guess you could use a hydraulic master hooked to you're current stock pedal....A...
This set up won't work with the stock maverick clutch pedal...The CNC set up is a reverse swing, meaning the master is mounted behind the pedal...
Sounds like the firing order is off...If he's changed cams that's where i would look first
If the wheel cylinders are leaking fluid onto the shoes at all, this will cause the pulling you're describing....Fold the rubbers on the wheel...
I'm doing the same swap with the same master/pedal set-up....The only thing i did different with my pedal bracket was that i extended it the front...
I wonder if he put that sock on afterwards:yahoo:
I had 'em on my Mustang with the exhaust exiting in front of the rear wheel....I might've well had straight pipes on it as the did little to...
Rub it down with a bunch of WD-40
Should be exactly the same
Just bought a brand new 8' traction lok and 3:80 ring and pinion for about $600.00......Plus, i think i read somewhere that the 8" is about 70...
Unless you're really pushing it, no need for an oil cooler on a street car
I just made my own....Going with the Nascar road race look, bare bones painted interior [IMG]
I've has a pair of 2v cleveland heads in my shed for 25 years thinking i might someday do this but it'll never happen
Been hitting it hard through the holidays Homemade Watts link [IMG] Cage [IMG] Frame connectors [IMG] Rear Bulkhead [IMG]
I once mounted a pusher slave to a fabbed up bracket to the bellhousing where it bolts to the block
These are going on my '72....15 inchers with a 245 tire.....When i sold the Mustang i was able to keep the wheels:clap: [IMG]
I just built a set for mine....Here you can see how the front frame rail isn't in line with the rear,,,,I cut my floors and fit 2"x3" tubing into...
Bodyshops have all the dimensions so they can straighten them out after accidents
I would imagine you could also have reversed-eyed springs made
Separate names with a comma.