He prob still has a cowl hood or 2 but you have to have a way to do local pick up. The hood is too big to ship. I tried :bawling:
Which hot wheels site are you referring to. The kiddie site is a nightmare to navigate.
I removed as much as possible from under the dash first (AC steering column, pedals, etc...) and then used my dremel with cutoff wheel to cut the...
Looks like there is plenty of room. I think I read that the Coyote is slightly smaller than the 4.6. [ATTACH]
Nice find. Better finish that Mustang first though. I cant wait to see how that one turns out.
I bought mine used. Came with the hardened mainshaft and .90 overdrive gear. I'm going to have a shop go thru it to ensure there are no damaged...
Make it quick. I'll be installing my g-force next month. :)
I just wanna know what whipper arm he's using. Im tired of looking at mine.
It looks like the RRS kit. Its the only strut conversion that I've seen to maintain the stock steering setup....
Those will work but you should look for something with multiple mounting points for the link bars. You will need the adjust-ability. The lower C/O...
The flat plate on my kit was 3/16. The round bar was about the same but in diffferent diameters depending on its purpose. Look at chassis...
I never felt comfortable doing my own welding. I tacked my pieces together for mock-up and then took them to a pro for finish welding. After all...
Not without mods and I dont know anything about the Fairlane.
Lets start with the upper coil over mount cross member. The frame mount will fit if you relief cut the U-channel. The Maverick frame rails at that...
They look cut to me as well. Notice the flange shape. Its not consistent from one to the next.
Right... sort of. I had to make a couple cuts in the seat pan on either side of the drive shaft tunnel to have clearance for the pinion support...
Depends on how you classify "highly modified". With my lack of fabrication experience and resources (2-car garage and jack stands) if I had know...
The frame rail mounts for the PHB are at the bottom of the picture. I made the above comment in response to an earlier comment about the mounts...
These frame rail mounts look almost exactly like the bolt-on frame rail mounts that I have for my panhard bar. It has flanges that bolt up thru...
Did you put smaller tires on it? It looks different. [IMG]
Separate names with a comma.
