New engine is almost done with any luck at all will be there
When your at the junk yard always check early torino wagons and mustang II
The Taurus you want to get is a 93 3.8 it will need to be trimmed to fit and turned up side down
Don't expect your ride height to change right away it take time for springs to settle
To be honest price . My guy who is advising me with my build has used a large number of sets of these on chevys with good results . Wanted to due...
Standard bore standard stoke 302 small Howard cam Procomp heads will post cam spect. later head and main studs
It looks like some of American car were converted to right hand drive ? Is always necessary.
I had a bench seat there is no way to candy coat it THEY SUCK . I have sn95 seats in my mav now they are almost as comfortable is my lazy boy I...
a 1/4" is with in spec. . i would get as close to square is possible.
The offset is built in the block already just bolt your new mounts in place you will be ok
welcome to the madness
thanks guys this will help. jay
Is there any spec out there for a Shelby drop for a maverick .. Thx Jay
Some one posted a chart for all ford rear width in the past . Could it be re posted or point me in the right way
Sorry all the pictures are in the gallery to many pictures to post. I can't take credit for this upgrade. The credit goes to Frank ( 71 Gold )...
Well I went an dun did it installed the relays what a differance. Did some voltage numbers with the engine off 8.7 volts at the light with engine...
Things you will need to due this install. 2 bosch style 40 amp relays $5.95 each 1 Volvo 2 speed fan controler ( controler are on all volvo...
For a fresh air vent pull on a 71 mav use a metal tad ( steel or aluminum ) bend 90 deg. sand both plastic and metal then epoxy then install...
I would start the car up and start moving wires in the engine compartment see if the engine quits . maybe start at the firewall plug for the fuse box.
You have basic. Things you may need are .... a slide hammer will help pull a stuck axle When using the pry bar to remove center section you will...
Separate names with a comma.
