you need to get a good cam from ford or a reputable source, the brake lites and turn signal lites are on the same circuit install before you mess...
You can unplug wire connector to switch run a hot wire to it to check it from there , or go to dimmer switch take wire connector and hot wire from...
Fred Carello did mine they looked like factory, he can fix you up, took to local upholestery shop to have installed, could have did myself after...
let motor warm up , turn fan on and feel the heater hoses, if one is cooler than other one you have plugged heater core or regulator valve which...
go to Auto-rv there are 3 Mavericks listed for sale 1 complete, 2 rollers all look good , this is Indiana listing if cant find let me know and I...
have them do a pressure check only takes 5 minutes, can do in parking lot, you can do it yourselve if they let you use little hand pump, take off...
you may have something in fan motor impeller, this happens when cars set and little critters get in and build a nest,if you pull the heater out,...
get a pressure check done on whole system, most auto parts stores can do this for you, they put a small hand pump in place of raditor cap and...
need help doing spoiler repair how to tell what color my paint code is to have some mixed at body shop,thanks please send to brickyard67@yahoo.com...
were the drain holes plugged in these areas, mine were from a undercoating that was done right after purchase, thank god it came from Oklahoma...
My neighbor got one from Harbor freight,had good luck with it, seen one at menard's for $90.00 was a lot better grade for a little more, you have...
pull one of the bulbs out and check if you got juice to contact inside where bulb end meets
they have a non-fuming cleaner from easy-off I found at our dollar store, works great rinses clean no smell.
might want to invest in a 12 volt test light will help eliminate a lot of headaches when tracing wiring, if you look around in this section there...
Might want to check on bottom of tank to see if a plug there for draining condensate, if so put a drain valve in place of it for easier draining,...
You can guess close on ratio,make a mark on hub or tire and mark on driveshft,count times driveshaft turns to 1 revolution of tire or hub,if...
you got a jewel compared to a lot I have seen, it has been protected or in good weather all these years. motor looks clean with valves covers off,...
might want to use a heat gun for the softening instead of torch lot safer,after you get the big stuff use acetone for the rest, can be bought at...
found a gold grabber with a red stripe down side, have a gold with black stripe identical to our grabber- Wally World comes through
My 71 Grabber has minor rust on front of rear panels,was like this when purchased, on mine where the roof drip rail ends toward side window there...
Separate names with a comma.