GREAT info! Never would have thought to look at that connector at all. I'll be cleaning it up on my lunch break today! I'll keep you updated.
I checked that my ground cable to the block is nice and tight. I even tried an additional cable on the other side from the block to the frame....
No, I switched over to an HEI system. Greatest investment I've made so far.
Hey guys...just wanted to pick your brains about something. I've noticed with the recent rains here (Tx.) that my Mav runs noticeably stronger...
I got one of the BIG blue ones....love it, but yes, it's freaking HUGE! Not sure if it's the higher voltage coil or not, but it gave me a little...
Thanks for the heads-up! At least if I go ahead and pick up the gasket, I'll have a nice template to use when modeling up a new one in Solidworks...
Did you have any problems with vac leaks on yours?...or do you just mean that you have a gasket like that but never used it on your 1.21?
I bought 2 working Motorcraft 2150 1.21 venturi carbs (351 cfm), a 1.08 parts carb and a working Autolite 1.14 venturi carb - all for $25. Was a...
I don't think flipping my PCV spacer will change anything due to the differences in the carb base shapes. I've attached a couple pics to show the...
I'll need a gasket for sure, but the actual base of the carb overhangs the old spacer and manifold where they bolt up. A gasket is only half of...
I picked up a Motorcraft 2150 (1.21) and tried to put it on my stock 302 in place of my Autolite 2100 (1.08). The bottom of the carb has a...
What happened on this? Did you end up having to replace the alternator to run your system?
Is this conversion neccessary or just something that's suggested. I don't run any kind of accessories other than a couple gauges and my radio....
What all is needed for a conversion?
Hey guys! I just got a couple used amps and speakers for my '71 Mav: Alpine 1000watt RMS mono amp (designed for Type-X 12" sub):...
I'm looking at a used 500cfm carb for $50 that supposedly still works, but needs a Ford A/T kickdown arm. If I buy it, I'll swap that pump over...
So if I put on a 500cfm Holley 2bbl and switched the 50cc accelerator pump with the 30cc pump, would that give me close to the same gas mileage as...
I'm considering a pair of these wheels myself. What offset did you have to get to fit those 17x8's all around without rubbing? Will those fit my...
Guess that means I need to get my dual flowmasters put on instead of my crap single exhaust, huh? :o
You'll probably get a tad bit of better gas mileage with a smaller 4 barrel carb as long as you keep your foot out of it and don't get into the...
Separate names with a comma.