Engine all back in...
Valve cover and final connects remaining...
Thanks check your inbox. :2thumbs:
The 16 pin two row gray plastic connector that plugs into the cluster. Need that part number.
I neglected to get the part number off of it while I had the cluster out...DOH! I was hoping someone had one handy to (or if they knew it) provide...
After pulling the cluster, I found the main connector is broken on the end. I have concern that this is the source of my lack of oil, water and...
Dash Lights I pulled the dash out once now to change out the offending bulbs...and I am pretty comfortable doing it now. Kid is now starting...
Oil pressure, temp, and amperes. Trisco from Harbor Freight. Yeah oil pressure is plastic line...good to know....other two are electric. I did...
Yeah. I pulled the cluster when I replaced the bulbs and was just hoping that it was bulbs only....I ensured the plug was in securely when...
Back on road Got the Car back from reassembly on 8/12. Had some trans hesitation on take off. Took it to the trans shop on 8/14 found governor...
From underneath ...obviously it will be challenging... After removing the first dash with window still in, I was able to get to the...
I also pulled a dash without removing windshield...but in the middle of the sweat-festival, I did see the wisdom of having no windshield prior to...
Put a boot on it at night? http://www.p-wholesale.com/upimg/9/433a1/anti-theft-car-wheel-lock-wheel-boot-std98lb-399.jpg...
I think it is intake due to the unleaded fuel passing across them...the exhaust ports have just the smoke...so I think those are ok. Could be...
I looked at the stock master rebuild kit online at Rockauto and my machinist's kit was about 200.00 less (rock's was like 680.00 then you have...
I have looked at the Aussie ones and also looked at the ones from classic inlines and they both are super expensive. The complete head rebuild...
Engine machine work Was called by the machinist to "come see what he found". Dreaded words. Magnaflux on block was fine. :yahoo: 1 Rod is bad...
Head on bench at machine shop:Close up twin exhause port cracked...
Head on bench at machine shop:Valve tops view
Head on bench at machine shop:Exhaust port view
Separate names with a comma.
