'74 California Sedan, no A/C or clock or cigarette lighter. Just recently I've run into a strange problem. A while back I drove the car to work...
If the resistor is bad you'd just replace the whole plate. They're on eBay every so often but I don't have the parts reference right in front of...
When I was having a similar problem (though my fuse blew as soon as you flipped the switch) the problem was a seized motor shaft. I replaced the...
Yes, we know. The idea was that a clip could be removed from said adapter and placed on the distributor. I went and bought a distributor and an...
Thanks a bunch, I'll let you know how it goes! Might've just saved me $50. :thumbs2:
It's a '74 with the Duraspark. Oh and it's the 250 I6.
Hey there all. Was doing a cap/rotor today and when I went to put the last clip on (it's always the last step isn't it?) the head of the clip...
Oh wow, thanks for the heads up. The first thing is the thermostat cover, but I'll do the oil sender when I put new plug wires, rotor and cap on...
Thanks for the input, rthomas771 and simple man! If they're supposed to come on in the START position, that makes more sense since that position...
I think you're misunderstanding the question. The entire system works. Allow me to illustrate using your four variables. Is there a ground? Yes,...
Right, but I'm talking about before starting the car, with water temperature at ambient.
If there were gauges installed I probably wouldn't be asking. Heck I'm tempted to install a water temp gauge anyway at this point. :p The problem...
I'll do that for the BRAKE and OIL lights, but the TEMP one comes on so it's fine. I'm just wondering how exactly the light 'knows' to come on...
Dang... so considering that the only light to come on is ALT, that means I've lost at least three. I'll ignore the FASTEN BELTS for now... So...
Heya all. So after losing a thermostat seal and spewing hot coolant everywhere I wondered just how hot my car was getting. I just did a head...
There was slight discoloration on the block there but no holes or damage or uneven-ness. The head gasket was not actually cracked but had bubbles...
So a friend of mine and I are tearing down the motor because it was getting oil in the coolant (but no coolant in the oil) and there was a pretty...
Okay, so the transmission is all repaired which is awesome, but now I'm having a different odd issue, one that's been there ever since I got rid...
Probably what happened. I found a local transmission shop that had been around since '64 and had people who actually knew the C4 inside and out...
No on both counts. That would have cost money. A lot of money. A lot of money I don't have. :(
Separate names with a comma.
