not sure that will work on a car with carburetor, I think that would be for a computerized fuel injected setup, Im guessing it works similar to an...
Had manual steering at the time of install
I used the headman long tube, forget the number but installed myself no problem. from bottom up had them in place with a couple bolts to hold them...
I posted a pic of my tie rod end. somehow 2 showed up and was unable add anything else to it. this is my modified stock tie rod end, I welded 3...
[ATTACH]
I told unisteer about all their design flaws 3 years ago, I can take a pic of my tie rod ends, its a simple fix, I will try to explain how to do...
I installed a Unisteer power rack in mine, here is some advice, 1 do not use the high pressure hose they provide it will not last have Napa make...
any early ford mirror will fit, my 69 1/2 had one but may have been swapped out at some point in time
My 69 1/2 does, assumed they all did, my parts cars both had them, 73 non A/C and 72 A/C both were busted up so did not keep them, one cable and...
I see that now, it mounts to bottom side of cowl just like the heater box, also needs the foam gasket or make one. someone will have to take a...
click on the link to see more pics
there is a knob on the end with a plastic bracket that attaches to the dash
http://www.ebay.com/itm/Original-Vent-1970-Ford-Maverick-Grabber-Duct-Vent-Air-Outlet/272743139985
The A/C cars also had the air vent on drivers side so it shouldn't be too hard to find, probably would have to be from a Maverick for proper fit
I can tell you this for sure when it darts back and forth it has too much toe out
I have asked Nick all he said was he is in the process of installing a coil-over I believe, he could not remember was his was set at and did not...
Same here but no talking about the play in the center take off on the rack, as it moves in upward direction from the force of tires wanting to...
Also since most if not all rack and pinion setups are for the most part straight in line which is not the case with the Maverick, so I am assuming...
I have had it in and driving it for about a year or more, awesome setup, no bump steer. I had a new pressure hose made after mine blew, they sent...
Separate names with a comma.