Not sure but I would check the choke operation, float level, and make sure fuel is not boiling out the carb (vapor lock).
Much nicer than factory, I think.
Yes there is a difference in tank and straps. I cannot recall exactly, but somewhere around 73-74 the tanks went to 22 gallon which necessitated...
I got the harness, distributor, and ignition module from a 75 and grafted it into a 72. The ignition module is mounted in the 72 where Ford...
https://secure.cougarpartscatalog.com/c5dz-2b129-b.html [ATTACH]
Something similar to this without the metal strip and numerous screws to hold it in place. [IMG]
There are 2 washers and a bushing for the switch. Did you install them? I had problems with the switch until I did. [IMG]
You may want to look at a roller idler arm, or not, since it is manual system. It may require less wheel effort if you max out the caster. In...
Not much, but at least something. Replaced the home weatherstripping a PO had screwed to the cowl with the 73 and up hood/cowl weatherstrip. Had...
Got the 9 inch housing de-greased and painted.
Was it a Boss 200 or the Boss 250?
I second that. One of the advantages of a Maverick\Comet is that there is not much you can do to these cars, upgrade\modification wise, that...
There are a few different kits on that site. Try to match the casting numbers on the block with the kits on the site.
You may want to get the rear as high as safely possible to help with the angle.
In my particular case the ride quality improvement was dramatic with roller perches. I would like to hear when you get them in.
On the distribution block there are 2 lines in, and 3 lines out. One is in from the master to the fronts, the other is in from the master to the...
I am probably wrong but I believe a 2 groove is for PS, and 3 is for AC.
The rear sump is for the front discs. If you cap the front right do you get flow on the left? Are the rears connected to the wheel cylinders?
I cannot speak as to the question, but I know a large number of early Mustangs did not still have the shrouds after a decade or so. My personnel...
Welcome. You can do it, easy stuff.
Separate names with a comma.
