Weight savings from removal? I wondered how much the compressor and brackets, engine compartment hoses, receiver/dryer, and condensor together...
For those who care, Cessna aircraft issued Service Newsletter number 04-10 which says that Hot Shot R414B refrigerant is now FAA approved "is a...
Check the tech article section on FordMuscle.com. They ran a white 67 mustang HARD (here in Sacramento) on two different traction devices...
Hot Shot and aircraft systems I am an aircraft inspector, and I receive a bunch of trade journals. In one recently there was a notice that a Hot...
I use a product called "Micro-Mesh" from Micro-Surface Finishing Products Inc. It is the same idea as stated above, but is a high quality kit...
Mr, Hines, You wrote: "Total Performance is a divisions of Ford Motorsports that specializes in the parts necessary to do the swaps. I bought the...
Mr. Hines, Do you have a web address or a phone number for Total Performance? Are any of the parts you listed, besides the flywheel/flexplate...
Are you sure the cam was installed correctly, the gears were correctly lined up? If you have ever had a timing chain slip a tooth or two, you...
A few years ago a friend gave me a whole chart of flow tests done at !5" pressure: 2.5" straight pipe was 521 CFM 2.5" Hooker Aero Chamber was...
"K" code 289 cast iron headers I always wondered how a set of the currently available (reproduction) 271 HP "K" code 289 cast iron headers...
I drove her twin in China, we called it Irene.
I looked up the shorties mentioned above and they are 1 1/2" primaries. Does anybody make 1 5/8" shorties for a 302 Maverick?
I love your stealthy engine compartment! Mr. Hines, That engine compartment is BEAUTIFUL, exactly what I want, a stealthy roller cam engine....
The same assembly on my the 4.0 in my wife's cherokee started to come apart also. The outer pulley part slid aft and contacted the front of the...
Engine leveler I bought one of these horizontal jack screw levelers, like the one in Aeon 71Mavericks picture above, at Harbor Freight Tools (a...
Sorry guys, I am snapping them up when he pulls them off of the car.
Tom, I would like to purchase it. I will send you my phone number.
Is it an open differential?
Tom, is it an 8" with those 3.80s? Do you want to sell the center section? I am in sacramento and I visit your area frequntly.
Maverick Man, You were right about the back spacing. It was 4.5" and there was only about .1" clearance between the tire and the springs with...
Separate names with a comma.
