I like that hitch elliot, Who makes it? I will also need to pull my john boat with the maverick this year.
Clint, I'm not sure how you mean. A hose certainly fits there and the holley installation manual lables it "full manifold vaccum port (power...
To make things easier, is there any sort of inline pvc valve that I can put between the carb and the filler neck? Also, I see that the old style...
Sorry, this is a mistake, its the driver side secondary. This would still have the same effect of rushing air into the driver side of the intake...
Problem pretty much solved. Beind inexperienced with carbs, I had to educate myself before I got stared. I read a carb book and then took to the...
I love it! Much better than the old flag pole. I have been thinking about doing the same thing. So that is on a loose fender, do you know about...
This has been great feedback and we are making progress!:thumbsup: This can now be recassified as a carb problem. The engine not getting fuel...
The valve train was worked. I had to change the head gaskets so I took off all the rockers and pushrods. they are the factory stamped rockers....
nice! I like this better than laying the wires out on the driveway and guessing. It took me much longer than i expected to get the wires to look...
I have the plugs gapped at .050. A 5.0 will run on only 4 cylinders, actually pretty well, considering. right now my 2,3,5,8 wires are not...
that sounds like a good idea. I still have the original Duraspark Distributor but no longer have the cap or wires that fit (i now have the hei...
I'm very puzzled...:90: I'm tring to sooth out the final details on my engine swap (5.0 from 95 mustang) and just hit a brick wall. It seemed to...
I've got a '77 Mav is southern NY. Total: 436 (thats a little closer to 2,586,675)
This is the one I got. http://www.mustangdepot.com/OnLineCatalog/Steering/manual_steering_adaptor.htm It was a very straight foward...
I had a similar problem. I ordered the B&M flexplate PN 50239 (cost $105.95 from summit) and it would not bolt up to the crank on my 1995 engine....
I just want to double check that I have it right. This is a picture of the distributor that I got to work with my roller motor. The three wires on...
Bluegrass, thanks for that explanation of the concept. now it makes sence to me. mavman, I like the wide powerband on the Erson cam. Being that...
The more I learnt, i see that I want to work with all of the following variables: 1. cam 2. torque converter 3. rear end gears The givens in the...
That is a useful link, thanks. The E303 might be right but I'm also looking at comp cams 35-420-8 and 35-440-8...
I decided I'd like to get a cam with higher performance than the stock one in my new 5.0 roller motor (bored .040, stock heads, air gap intake,...
Separate names with a comma.