Im slowly restoring the Cyclone, its a solid Cali car but needs paint inside out, and the plan is a restomod it! But I recently bought and had...
Ok, so here's what I now know from scanning around both cars: My 289 is a 6 bolt and both trans are case fill, so hopefully that side of things...
100 ton brake press & laser cutter :cheers2: I will climb under both cars today, so that will give me a good idea of whats what and i'll report...
Ok, just so I can wrap my head around this. So if it turns out that that both engines have the 157t flexplates and both trans are case fill,...
I just read somewhere else that there were 3 different bolt patterns from the torque converter to flex plate :( so it looks like im going to have...
Thanks for the info, I think I read that all 289s 65 and up are 6 bolt, but I will have a look see :)
Hi guys I have a good 289 "A" code which is currently sitting in my 65 Cyclone mated to its original C4 And I have a 73 250 Maverick with C4...
Yeah, going to have a look before I order one, I just need to keep a can of gas in the trunk and run down whats in the tank :)
Ok, went with my instinct and powered up pos. 17 on the connector. This gave power to the regulator and the needle moved every so slightly to the...
Hi All Since owning my 73 the fuel gauge has never worked. First thing I did was to ground the sender and check the wiring but this was ok. So...
Washed off and ready for a breakfast meet tomorrow [ATTACH]
Problem solved! When I pulled the carb 3 or 4 times to check to see what was going on, I didnt pull the brass caps that cover the diaphram's as...
Thats the problem it seems, its drawing fuel from within the carb somewhere, not air (spindle shaft looks good). If I disconnect all the vacuum...
It doesn't stall if the mixture screw is turned in fully. In fact it doesn't make any difference to the running no matter what position its in!...
Hi all Ever since I purchased my 1973 250 Auto (non AC) it has run rough on idle. I rebuilt the carb and fitted new gaskets which seems to have...
I promised my wife that I would lay off the cars this year, and do some work on the house! But i had a two week window to get it done, so I spent...
The paintwork is now done, and the vinyl roof dyed black (from green), and I have now fitted back up together. Waiting on a few bits and pieces...
Managed to get some paint on this morning[ATTACH]
Yes the dog dishes were borrowed from my 65 although not original to the Cyclone! I have some 15" TT's to go on the Maverick once its painted :)...
Spent yesterday stripping all the bright work off, and welded up the 38 LDO side trim holes :90:[ATTACH] [ATTACH] [ATTACH]
Separate names with a comma.