I did do that. Thanks for the tip.
Thanks, I did exactly what NPD Jeff was talking about, tightened lower control arm with wheels fully extended. Now I have some place to start.
I did install new lower control arms when swapping spindles. Gonna have to double check position of springs
Look at the pic I posted compared to thumbnail in profile. I did not change springs, just the disk spindles. Mind you, in this pic the rear is...
I assume you meant the along the process, no I didn't. Sorry
So I got a disk brake set up from a 77 Maverick for my 73. After the swap my front end is sky high. My question is, did the 77 have different...
Rebuilt doors: pulled and greased regulators and latch mechanisms, new window channel weatherstripping and beltline felt, new hinge pins. Has a...
Made a door hinge spring cuz mine was snapped in half. I heated and bent steel rod from box store. Not easy to do with my limited anvil choices....
Really happy with the results of the '73 bumper tuck. Went 2.5 inches and it seems just right.
Got a new cut-off wheel/grinder and sliced and diced. 6 lbs savings is all but I was obsessed and it had to be done. I'm sure some of you have...
I started the front bumper tuck today by drilling new bolt holes 2.5" from originals. But, after lugging that behemoth bumper support/frame...
Thanks everyone for tips and insight. With the head off and on the ground with double layered, cellular cardboard under it, I placed a 1 foot 2x2...
Will check that in the morning. Thanks.
That makes sense.
Yes, it's on a stand. I'll be checking it out further tomorrow. Supposed to rain anyway.
Thanks. I'll try that. I'm also going to check the timing gear and make sure it's lined up and not indexed.
Frank, can that happen with the plugs out?
Hi all, I have a conundrum for 5.0 motor experts. For the Mav, I bought a 1989 5.0 HO with Edelbrock Performer heads with stamp 6025. I wasn't...
I overfilled it according to dipstick. It drives pretty good now. So, what does that mean?
When I look up lubegaurd, says not for use with Type F ATF. Which one exactly do you use?
Separate names with a comma.
