I’m talking about keeping the gasoline cool. The pumps can totally hang with heat. If the fuel is low, there’s minimal gas to take away the heat,...
I’m totally cool with running a return system over the internally bypassed Holley referenced above. I can see the fuel heating deal being a...
I didn’t notice that on the FiTech site, but that’s probably going to work. Thanks for the link.
When you remove the evap fitting, the bottom side looks like this. There’s a tiny hole inside the barbed end that could easily be drilled out to...
Here’s the 15g tank with the evap provision installed. Notice the nasty rust and goo inside the tank. Not good for efi.
I’ve got a 73 maverick my son and I are building for his first car. The car sat for many years without a motor. We’ve come to the part where the...
Thanks for the pics. I’m a huge proponent of ‘measure more than twice’ before cutting anything. Seeing the factory hole as many times as possible...
Perfect! Exactly what I was looking for. Thanks to all!
Saw your pic above, exactly what I was looking for. It looks like your image has a ‘hump’ added to clear the shifter mechanism. Is this how it was...
Another...
You can see the scribed mark in yellow paint pen where the sound deadener was. It’s offset slightly to the drivers side. Is this correct or should...
The factory hole for the shifter to stick through the floor using a 3 or 4 speed manual.
Does anybody have a picture of their manual trans floorpan with the shifter hole showing? I pulled my carpet today, and discovered the sound...
Thanks for the info on the Halo top. I guess if it’s simple, there’s no reason to have a direct replacement!
I’m going to swap from a column shifter to a floor shifter in my 73 maverick. It’s a 302/C4, and I’m wondering if anybody has used a cable type...
Hi all, I’m doing a bit of work on my 73, and the time has come to address the old vinyl roof. The previous owner removed all the original vinyl...
I’ve got a couple Fox pedal boxes. If I can’t find a factory type setup, I’ll do that. Had a negative experience using a cable style setup on a...
I’ll have to check there. Anybody got a lead on a manual pedal assembly for manual brakes? I’d like to swap in a T5. I’ve swapped T5’s into...
Another pic
It has its share of corrosion, but overall it’ll be a good builder. The floors are mint, so that’s good. I’ll need a lower passenger quarter patch...
Separate names with a comma.
