Sounds like it's time for a rebuild :).
Removing the dash is a royal pain in the ass. There are screws under the lip of the windshield seal that you have to get out. They're difficult...
Laying down, welding overhead is a pretty tough position. Your welder can probably do it, you'll just have to take your time with it and do it...
how do you plan on welding them in with the suspension loaded?
Get an automatic antenna and you won't have to mess around with any of that. I have one off my old supra that I'll be installing pretty soon....
June of '81 here.
How about toughness though. For some stuff, you want a finish that won't chip and will last. What do you guys think about powdercoating in...
You guys going to the all american get together on sat or sun?
One other thing to note is that if the hood scoops really did take in a ton more air than normal cars, it would throw off your A/F mixture and the...
Yeah, you're right TL. The further forward the scoops are along the hood, the better. The best place is right where air comes into your...
Any location close to the surface of the hood is not very effective. The one exception is the high pressure area on the base of the windshield,...
The performance gain you would get from making the grabber hood scoops functional is somewhere between non-existant and really really really...
:lolup: :clap: :clap: :clap:
I was lucky enough to find a 4 door with everything that I wanted my 2 door to have. I used the brake pedal assembly, master cylinder, brake...
I think a few people have tried to use the hood shocks on a mav hood and it didn't work due to the strange motion of the 4 bar linkage (hinge).
Well, I also converted over to power front discs at the same time I swapped rear ends. Prior to that I had manual 4-wheel drums, so there is a...
I recently swapped out my 4 lug rear for a 5 lug rear. The swap was pretty easy. We removed and installed both rear ends in about 6 hours, and...
I have a spare frame mount if you would like it. I bought it on ebay for like $10 with the intention of fabricating up some new ones. Before I...
pricey...
Cool bracket Dan. How is your cable operated emergency brake going to work with your rear discs? On an old Supra I used to have, it had sort of...
Separate names with a comma.
