A few days ago my cig lighter stopped working. checked the wire that plugs in the back and got no power. needed a new lighter(no ceramic hardly...
you tellin me a rebuild is needed..... so sad
noted...thank you for that little bit...will try it this weekend...makes toooooooo much sense
have had car only a year and a half and is my daily driver.....:slap: never had the engine out or messed with the flexplate bolts
no intake leak.
No I did not have to do that.... that stinks.
I DUNNO HOW to do that! LOL! sounds simple enough! the engine is a 302! are the oil gallery and cam plug easy to get too?
I have seen a lot of posts with questions on removing an oil pan. I will hopefully help quite a few out with an easy remove/replace procedure. My...
I am getting annoyed here. Just replaced rear main seal thinking it was the leak issue. Maybe i got a bad (new) seal...i dunno. old seal was still...
Yes Paul, was thinking that too....going to take it off in a bit and check it out.... The modulator is cheaper than the one i bought last...
ya all is good for the floats..set at 7/64....last night the carb was fine.... car finally started with no problem....vaccum reading is dead...
accel pump not sure where to adjust the lever. Sooo. Nope... You got the know how
cannot remember what the edelbrock looks like but I use to own a comet and there was a breather on one valve cover and an oil fill cap type on the...
interesting i could try that..... the valve works but there has been oil(til tonight) being kicked out around the breather that has the pcv hooke...
every time i give it gas....idles great....i just read through many threads about white smoke too and am going to replace the modulator because i...
i have been losing a lot of tranny fluid lately....ever since the smoke started....i will replace the mod on thursday....been smokingand draining...
well? it has been awhile since the last post on this issue.... I have the same issue with my 73 mav w/ 302 starving for fuel when i acdcelerate....
carb today i tried getting my carb straight again. not sure if it is just that or the pump too. only get to work on it in the cold evenings....
I have seen a few of you state to never use fram filters...what's up with that? I am curious
My 73 does the same thing...just happened when I changed the oil but i only went from 10w 30 to 10w40...should not have been an issue...Also...
Separate names with a comma.
