thanks for the info guys... I will be buying new piston and rods, they were left out in the weather and look like crap... So I will be going...
Sonic Blue?? My 2005 GT Mustang was sonic blue......... Awsome color:2thumbs:
Does anyone have anything negative to say about building a 1995 302 from a gt mustang?? I know there are some that say that some years are better...
Okay I'll play, It makes 4 of us.... Pics please
Pull the fuel line from the carb. Stick the line in a bucket, bottle or something to catch the gas, turn over the motor and see if the pumps...
Brake probems are a pain... It sounds like you have a leak, does your fluid level get low? I have mastercylinders leak on the back side where it...
yea check for fuel from the pump, also the filter? What kind of carb is on it??
You are correct about the heads and what they will and wont do.. The flow numbers for the GT40 heads are okay, just OKAY. Thats why I recommended...
Nope checked out with a buddies stang and his read the same in my car.. Its idling at 1050 also check it with my nifty tach gun.. And yes those...
GO AFR or stay with what you have, and switch to an x303 ford racing cam.. listen to mine..306 x303cam gt40 heads [media] that motor was going...
:hmmm::hmmm: Learn something new everyday:clap: Here you go have a couple thumbs up on me:thumbsup::thumbsup::thumbsup::thumbsup::thumbsup::thumbsup:
NICE question.... I need a new dash.. previous owner took a hammer, jig saw, tourch, and at least 4 kicks with a boot???? Then he duck taped the...
351c :bowdown:Glad to see someone elss brave the 351 Cleveland.. worked on mine today, sad to say it has to come back out.. i have two dead...
Desk top So from what I see the Desk top dyno is pretty close, I just picked up the program and have not played with it yet..But cant wait..
351 351 Windsor has a taller deck than the 351Cleveland so I dont think you would be able to set it in with out mods.. My cleveland lays...
Thanks for the help everyone, I will have to try contacting Chandler ro see what he has.............
Cleveland to cut or not to cut?????????? I have a 351C in my 74' with no shock tower mods...but I have 4 plugs that I cant even think about...
Does anyone make a replacement panel for the radiator support.. a previous owner cut mine up so he could use the wrong radiator....:hmmm:......
Some of you may remember I was buying my mav from my brother and he needed his money sooner than latter so we had to sell...that sucked... Well...
I have Iron gt40s of an 88 stang, they are okay... But I would trade up to AFRs in a minute :bananaman
Separate names with a comma.
