I did a 302 swap years ago and used JB weld to plug the holes in the back of my heads and one side blew out today. Is that hole threaded? If so...
New Wheels 15x7 205/60 front & 255/60 back 4inch bs
I was having a moment and I'm sorry. They do rub even with 215/60/15 which is too small for an 8" rim. I guess it was around the year 2001......
ok you're right, sorry. They don't stick out but they don't look that good.
This is not helpfull.
Does anyone know if this looks good or will work with a 3.5" backspacing? Any pictures? Thanks, I'm going to look at some wheels tonight. I've...
Jeremy, You just need disc brakes and you'll be able to stop. I drove with the front drum brakes for a year, they are a safety issue...stay...
Update I bought a calibration kit and have now tried several tunes. It had a small stumble when it warmed up and the plugs looked lean... So I...
I can't help with the pictures but, I thought a particular year of crown vic had a regular rotating water pump. I'm not sure because when I did...
I tried to check some heads at the airport and because they were on a car at one time they said no. That was soon after 911. Anyway, I'm not...
The edelbrock was running too lean at first so I went two stages rich on the "cruise" and "power" mode with a rod change but left the secondaries...
There is a potential trade on craigs list for a 750 double pumper.:burnout:I'll have a daily driver carb and a drag carb. I'll cut my losses and...
You mean, Edelbrock is mechanical secondary.
Newtoford is right but with overdrive you could go as tall as 3.55:dance:
I took a file to my base plate and with figure 8's a planed the thing flat again. Now it's back on the car. It seems that with the edelbrock I...
Can the base plate be machined?
I’ll call the tech line. As for the Holley, it appears to be warped. It was only bolted to a ¼” gasket no spacer… so if I put a spacer on it now,...
Separate names with a comma.
