i agree with scooper my new motor has gt 40 x heads (aluminum) with a x cam and 10-1 compression and it still lacks in the torque department in a...
the problem has been fixed in this case the 2 t bolts that hold the top peice off the column to the lower half (this was a column shift car) had...
I have owned this car for 9 years and it was the only time it has done that to me
Thanks that will be very helpfull, I'm thinking I may have lost the snap ring or the bearing retainer broke
Not in years the wheel is definetly tight on the shaft it seems to be pulling the whole shaft with it I can see the wiring harness move with it
Thanks yes the turn signal switch is damaged and won't self cancel but as long as it won't pull out more than it is I'll drive it home
I'm currently at a locall show and on the way here I went through the gears and the steering wheel and steering shaft came out about a half inch...
you should give up now and sell it to me cheap and call me crazy lol, just kidding welcome to the site from ct
i used a stock 5.0 mustang driveshaft which worked well with the stock ride height with a 6 3/4 rear end, but when i lowered the car and installed...
dont hold me to it but if memory serves me correct there were to platforms for the lincoln versailles the early one being built on the...
welcome from ct, enjoy the sight as much as you do the car 1970 maverick 1976 maverick 1985 turbocoupe 1977...
yes its an original paint car unfortinetly a car tent fell on the drivers side lightly denting the door and quarter plus most of the panels were...
so i fell into this 76 maverick with only 22,000 miles on it for $500 sounds great right, the bad news is the owner before me decided to take the...
now that the paint is dry i started putting the engine compartment together days away from being a 302 car
sand blasted and painted the engine compartment on the 76, the girl friends still crying about the smell lol
hi guys i havent had to ask for help in awhile but after looking at many older posts i still am a bit lost as what to do here. my 70 is finally...
thanks for all the advice even though every one has a different idea you all have some good points. I,ve got my heart set on the 331 but i figured...
hi guy and gals, i recently had to put the 302 to rest but am being torn in 2 directions with what to put in her i originally wanted to do a 331...
it all depends what you want to do, if you are still going to retain original offset wheels a fox style or 94+ rear will not let you they are both...
whats wrong with owning a honda??? mine CUTS MY LAWN very well ,haha good stuff :rofl2:
Separate names with a comma.
