I'm in the middle of doing a 73 rear bumper swap on my 74 and was wondering how to remove the mount from the frame rail. I took the 2 bolts out and smacked it with a hammer and nothing happen. Am I missing another bolt or 2 to get this off? Do I need a bigger hammer?
i seem to remember a bolt comming up through the bottom as well, tho i could be wrong. its been a while
I just talked to Frank about this ... I told him either your not removing all the bolts .. or you need to hit it harder if it 's rusted on. I don't recall any issues removing them on mine.
I got them off...One bolt screamed like a school girl with each swing of the wrench...had to use my foot to push the wench each turn...and it was a long off-set boxed wrench! The other bolt hit the leaf spring eye before I smack the mount a couple times with a 5# sledge hammer to break it loose. This allowed the mount to swing back up in the frame rail leaving room to back out the bolt.
I finally found time to finish swapping out the rear bumper...looks better already even with the muti-color parts
Yep...Thanks for watching me remove and carry the parts and handing me a wrench at the junkyard... Seriously, I couldn't had done it without your knowledge knowing what parts I needed. Thanks again for the rear valance.
i have a 74 maverick and im trying to take off the bumper saporsts also but for the rear i dont know how to get the bolts in it and for the front i have no idea can some one plz help or give me an idea
i have the bumpers from a 71 and i want to put them on my 74 i got the rear on but i have no idea what im gonna do for the front cause im trying to take the bumper sapports off