I saw some power windows in the Summit catalog. They were about 250.00. Does the Maverick share the same parts as a Mustang? Can they be modified? I searched for this topic and didn't come up with anything. Thanks in advance.
Tom Hackman wrote a great article on how to put power windows in the Maverick/Comet using Taurus motors. Its really not that complicated. Check with Craig and see if you can get a back issue of Shorthorns. You need March/April 2004.
I'll chime in with my .02 and mention that Electric Life sells these really neat jamb looms in stainless steel. http://www.jegs.com/webapp/wcs/stor...atalogId=10002&storeId=10001&categoryId=25993
You can buy universal kits that use your existing regulators. I got a set off evilbay for around $75, without switches.
I'll get a catalog on monday and bring it home for info purposes and give any info as needed. they make a nice product and make kits to fit most any vehicle
Thanks... I started to restore the car, but it was 80 degrees today and the winter was warm so....I better get crackin' before it's 110 degrees. Bako sucks in the summer.