i had an idea for another part i needed. Jeff and i went down to my friends shop yesterday about 4:30 PM. i told Harold what i had in mind... he took a piece of flat stock and drew it out, then cut out the drawing with his...plasma cutter. i took a piece of square stock, clamped it in his...vice...and cut it to length with his...porta band saw. we took the piece Harold cut and bent a 90 degree bend in it on his...break. itook the square stock and cleaned it up in his...beadblaster. then he welded them together with his...Mig welder, then i ground the welds down with his...4" side grinder. we were back home test fitting the part by 5:05 PM. i will paint it today with a can of paint Harold got for me through one of his...suppliers. Harolds motto: "to get anything done, first you got to have a...want to." ...Harolds...Friend...Frank :Handshake "peoples, don't leave home without them."
